Yazar "Altan, Mehmet Orhan" seçeneğine göre listele
Listeleniyor 1 - 9 / 9
Sayfa Başına Sonuç
Sıralama seçenekleri
Yayın 3-Dimensional pre- and post-fire comparison of forest areas(International Society for Photogrammetry and Remote Sensing, 2018-03-06) Akça, Mehmet Devrim; Stylianidis, Efstratios; Poli, Daniela; Gruen, Armin W.; Altan, Mehmet Orhan; Hofer, Martin; Smagas, Konstantinos; Martin, Victor Sanchez; Garcia, Alejandro; Jimeno, Elisa; Walli, AndreasForest agencies give special attention to forest fires where post-disaster loss can rarely be gauged in a quick and economic way unless an appropriate technology is adopted. Determination of the planimetric and volumetric changes between pre- and post-fire is in high demand. The FORSAT system (a satellite processing platform for high resolution forest assessment) was developed to meet the relevant demands. It has the capability of extracting of 3D geometric information from the very-high resolution (VHR) imagery from satellite optical sensors and automatic 3D change detection. FORSAT includes two main units. The first one is dedicated to the geometric and radiometric processing of satellite optical imagery and 2D/3D information extraction. This includes: image radiometric pre-processing, image and ground point measurement, improvement of geometric sensor orientation, quasi-epipolar image generation for stereo measurements, digital surface model (DSM) extraction by using a precise and robust image matching approach specially designed for VHR satellite imagery, generation of orthoimages, and 3D measurements in single images using mono-plotting and in stereo images. FORSAT supports most of the VHR optically imagery commonly used for civil applications: IKONOS, OrbView - 3, SPOT - 5 HRS, SPOT - 5 HRG, QuickBird, GeoEye-1, WorldView-1/2, Pléiades 1A/1B, SPOT 6/7. The second unit of FORSAT is dedicated to 3D surface comparison for change detection. It allows users to import DSMs, to co-register them using an advanced 3D surface matching approach and to calculate the planimetric and volumetric changes between epochs. The capacity and benefits of FORSAT have been tested in two real cases, where are burned areas located in Cyprus and Austria. The geometric characteristics of burned forest areas have been identified both in 2D plane and 3D volume dimensions, using pre- and post-fire optical data from different sensors. FORSAT is a single source and flexible forest information solution, allowing expert and non-expert remote sensing users to monitor forests in three and four dimensions from VHR optical imagery for many forest information needs.Yayın Co-registration of 3d point clouds by using an errors-in-variables model(Copernicus Gesellschaft MBH, 2012-08-25) Aydar, Umut; Altan, Mehmet Orhan; Akyılmaz, Orhan; Akça, Mehmet DevrimCo-registration of point clouds of partially scanned objects is the first step of the 3D modeling workflow. The aim of co-registration is to merge the overlapping point clouds by estimating the spatial transformation parameters. In the literature, one of the most popular methods is the ICP (Iterative Closest Point) algorithm and its variants. There exist the 3D least squares (LS) matching methods as well. In most of the co-registration methods, the stochastic properties of the search surfaces are usually omitted. This omission is expected to be minor and does not disturb the solution vector significantly. However, the a posteriori covariance matrix will be affected by the neglected uncertainty of the function values. This causes deterioration in the realistic precision estimates. In order to overcome this limitation, we propose a new method where the stochastic properties of both (template and search) surfaces are considered under an errors-in-variables (EIV) model. The experiments have been carried out using a close range laser scanning data set and the results of the conventional and EIV types of the ICP matching methods have been compared.Yayın Determining pull - out deformations of bonded metal anchors embedded in concrete by means of photogrammetry(International Society for Photogrammetry and Remote Sensing, 2012) Avşar, Edip Özgür; Altan, Mehmet Orhan; Doğan, Umut Anıl; Akça, Mehmet DevrimChemical anchorages are applied in many engineering implementations, particularly strengthening of reinforced concrete structures. During strengthening procedure; chemical anchorages should be tested, since they supply to transfer the load between existing construction elements and newly added elements. Therefore; the study of the quality of chemical anchorages is an important issue in construction materials science. In this context; the most important experiment is to determine the pull-out loads of embedded anchorage reinforcement by applying axial loads. In this study; it is aimed to determine the displacements of steel reinforcements, embedded into concrete by using chemical anchorages, while applying axial pulling loads. In order to determine the displacements and load - deformation graphs; starting conditions and every 10 bar pressure applied conditions of the steel reinforcements were captured by the cameras. The obtained images were evaluated by using photogrammetric software. Based on the photogrammetric post-processing results, the load - deformation graphs were plotted and the loads at loss of adhesion were determined.Yayın Determining pull-out deformations by means of an online photogrammetry monitoring system(Cem Gazioğlu, 2015-03-02) Avşar, Emin Özgür; Altan, Mehmet Orhan; Doğan, Ünal Anıl; Akça, DevrimChemical anchorages are applied in many engineering implementations, particularly strengthening of reinforced concrete structures. During strengthening procedure; chemical anchorages should be tested, since they supply to transfer the load between existing construction elements and newly added elements. Therefore; the study of the quality of chemical anchorages is an important issue in construction materials science. In this context; the most important experiment is to determine the pull-out loads of embedded anchorage reinforcement by applying axial loads. In this study; it is aimed to determine the displacements of steel reinforcements, embedded into concrete by using chemical anchorages, while applying axial pulling loads. In order to determine the displacements and load - deformation graphs; starting conditions and every 10 bar pressure applied conditions of the steel reinforcements were captured by the cameras. The obtained images were evaluated by using photogrammetric software. Based on the photogrammetric post-processing results, the load - deformation graphs were plotted and the loads at loss of adhesion were determined.Yayın FORSAT: a 3D forest monitoring system for cover mapping and volumetric 3D change detection(Taylor and Francis Ltd., 2020-08-02) Stylianidis, Efstratios; Akça, Mehmet Devrim; Poli, Daniela; Hofer, Martin; Gruen, Armin W.; Sánchez Martín, Víctor; Smagas, Konstantinos; Walli, Andreas; Altan, Mehmet Orhan; Jimeno, Elisa; Garcia, AlejandroA 3D forest monitoring system, called FORSAT (a satellite very high resolution image processing platform for forest assessment), was developed for the extraction of 3D geometric forest information from very high resolution (VHR) satellite imagery and the automatic 3D change detection. FORSAT is composed of two complementary tasks: (1) the geometric and radiometric processing of satellite optical imagery and digital surface model (DSM) reconstruction by using a precise and robust image matching approach specially designed for VHR satellite imagery, (2) 3D surface comparison for change detection. It allows the users to import DSMs, align them using an advanced 3D surface matching approach and calculate the 3D differences and volume changes (together with precision values) between epochs. FORSAT is a single source and flexible forest information solution, allowing expert and non-expert remote sensing users to monitor forests in three and four (time) dimensions. The geometric resolution and thematic content of VHR optical imagery are sufficient for many forest information needs such as deforestation, clear-cut and fire severity mapping. The capacity and benefits of FORSAT, as a forest information system contributing to the sustainable forest management, have been tested and validated in case studies located in Austria, Switzerland and Spain.Yayın Photogrammetric deformation monitoring of the second Bosphorus Bridge in Istanbul(International Society for Photogrammetry and Remote Sensing, 2014) Avşar, Özgür; Akça, Mehmet Devrim; Altan, Mehmet OrhanImproving the efficiency of bridge inspection and minimizing the impact of dynamic load on the long term deterioration of the bridge structure reduces maintenance and upkeep costs whilst also improving bridge longevity and safety. This paper presents the results of an on-going project whose ultimate goal is the real-time photogrammetric monitoring the structural deformations of the second Bosphorus Bridge of Istanbul.Yayın Pre- and post-fire comparison of forest areas in 3D(Springer Berlin Heidelberg, 2019) Akça, Mehmet Devrim; Stylianidis, Efstratios; Poli, Daniela; Gruen, Armin W.; Altan, Mehmet Orhan; Hofer, Martin; Smagas, Konstantinos; Martin, Victor Sanchez; Walli, Andreas; Jimeno, Elisa; Garcia, AlejandroA satellite processing platform for high resolution forest assessment (FORSAT) was developed. It generates the digital surface models (DSMs) of the forest canopy by advanced processing of the very-high resolution (VHR) optical satellite imagery and automatically matches the pre- and post-fire DSMs for 3D change detection. The FORSAT software system can perform the following tasks: pre-processing, point measurement, orientation, quasi-epipolar image generation, image matching, DSM extraction, orthoimage generation, photogrammetric restitution either in mono-plotting mode or in stereo models, 3D surface matching, co-registration, comparison and change detection. It can thoroughly calculate the planimetric and volumetric changes between the epochs. It supports most of the VHR optical imagery commonly used for civil applications. Capabilities of FORSAT have been tested in two real forest fire cases, where the burned areas are located in Cyprus and Austria. The geometric characteristics of burned forest areas have been identified both in 2D plane and 3D volume dimensions, using pre- and post-fire optical image data from different sensors. The test studies showed that FORSAT is an operational software capable of providing spatial (3D) and temporal (4D) information for monitoring of forest fire areas and sustainable forest management. Beyond the wildfires, it can be used for many other forest information needs.Yayın A precision estimation method for volumetric changes(IEEE, 2019-06) Akça, Mehmet Devrim; Stylianidis, Efstratios; Gruen, Armin W.; Altan, Mehmet Orhan; Hofer, Martin; Smagas, Konstantinos; Sanchez Martin, Victor; Walli, Andreas; Jimeno, Elisa; Garcia, AlejandroEarth surface changes are often computed by comparing the sequences of digital elevation models (DEMs) so called the DEM of difference (DoD) method. We present an operational DEM generation, co-registration and DoD comparison software in which the surface changes are quantified in metric units of volume. A practical method, which is based on the law of error propagation, is developed to estimate the theoretical precisions of volumetric changes. The proposed pipeline can estimate the change of object volumes (in terms of loss and gain) together with their precision numbers. Change of the forest volume in a fire effected region in a test site is analyzed for the validation. The method can be used for various change detection applications related to forestry as well as other topics such as earthworks, geomorphology, mining, and urbanization.Yayın Total least squares registration of 3D surfaces(Copernicus GmbH, 2013-10-16) Aydar, Umut; Akça, Mehmet Devrim; Altan, Mehmet Orhan; Akyılmaz, OrhanCo-registration of point clouds of partially scanned objects is the first step of the 3D modeling workflow. The aim of coregistration is to merge the overlapping point clouds by estimating the spatial transformation parameters. In computer vision and photogrammetry domain one of the most popular methods is the ICP (Iterative Closest Point) algorithm and its variants. There exist the 3D Least Squares (LS) matching methods as well (Gruen and Akca, 2005). The co-registration methods commonly use the least squares (LS) estimation method in which the unknown transformation parameters of the (floating) search surface is functionally related to the observation of the (fixed) template surface. Here, the stochastic properties of the search surfaces are usually omitted. This omission is expected to be minor and does not disturb the solution vector significantly. However, the a posteriori covariance matrix will be affected by the neglected uncertainty of the function values of the search surface. . This causes deterioration in the realistic precision estimates. In order to overcome this limitation, we propose a method where the stochastic properties of both the observations and the parameters are considered under an errors-in-variables (EIV) model. The experiments have been carried out using diverse laser scanning data sets and the results of EIV with the ICP and the conventional LS matching methods have been compared.
