Yazar "Subedi, Bhagawan" seçeneğine göre listele

Listeleniyor 1 - 5 / 5
  • Küçük Resim
    Yayın
    Dissolution and subsequent re-crystallization as zeroing mechanism, thermal properties and component resolved dose response of salt (NaCl) for retrospective dosimetry
    (Pergamon-Elsevier Science Ltd, 2011-09) Polymeris, George S.; Kitis, George; Güneç Kıyak, Nafiye; Sfamba, Ioanna; Subedi, Bhagawan; Pagonis, Vasilis
    In the present study we report dosimetric properties of iodized salt aiming at using it as an accidental luminescent dosimeter. It was found that the very good sensitivity of its main dosimetric peak is strongly affected by thermal treatments. This is also the case for OSL emission. The sensitivity loss due to heating implies that caution should be exercised while applying single aliquot protocols for dose evaluation. The sequence of dissolution and subsequent re-crystallization was established to be an extremely effective zeroing mechanism for the TL signal. The linearity in the dose response was also monitored in the case of dissolved and subsequently re-crystallized salt. In the case of naturally occurring salt, zeroing of the TL signal due to dissolution as well as the linearity of dose response up to doses as large as 100 Gy were found to be very promising features for dating applications.
  • Küçük Resim
    Yayın
    Reconstruction of thermally quenched glow curves in quartz
    (Pergamon-Elsevier Science Ltd, 2012-04) Subedi, Bhagawan; Polymeris, George S.; Tsirliganis, Nestor C.; Pagonis, Vasilis; Kitis, George
    The experimentally measured thermoluminescence (TL) glow curves of quartz samples are influenced by the presence of the thermal quenching effect, which involves a variation of the luminescence efficiency as a function of temperature. The real shape of the thermally unquenched TL glow curves is completely unknown. In the present work an attempt is made to reconstruct these unquenched glow curves from the quenched experimental data, and for two different types of quartz samples. The reconstruction is based on the values of the thermal quenching parameter W (activation energy) and C (a dimensionless constant), which are known from recent experimental work on these two samples. A computerized glow-curve deconvolution (CGCD) analysis was performed twice for both the reconstructed and the experimental TL glow curves. Special attention was paid to check for consistency between the results of these two independent CGCD analyses. The investigation showed that the reconstruction attempt was successful, and it is concluded that the analysis of reconstructed TL glow curves can provide improved values of the kinetic parameters E, s for the glow peaks of quartz. This also leads to a better evaluation of the half-lives of electron trapping levels used for dosimetry and luminescence dating.
  • Küçük Resim
    Yayın
    Thermal quenching of thermoluminescence in quartz samples of various origin
    (Elsevier Science BV, 2011-03-15) Subedi, Bhagawan; Oniya, Ebenezer O.; Polymeris, George S.; Afouxenidis, Dimitrios; Tsirliganis, Nestor C.; Kitis, George
    The effect of thermal quenching stands among the most important properties in the thermoluminescence (TL) of quartz on which many applications of TL are based. Since the quartz samples used in various applications are all of different origin it is useful to investigate whether the values of the thermal quenching parameters, i.e. the activation energy for thermal quenching W and a parameter C which describes the ratio of non-radiative to radiative luminescence transitions, evaluated mainly in specific quartz samples can be extrapolated to quartz samples of unknown origin as well as to quartz samples which are annealed at high temperatures. In the present work the TL glow curve of a series of un-annealed and annealed natural and synthetic quartz samples were studied as a function of the heating rate between 0.25 K/s and 16 K/s. Using an indirect fitting method it was found that the thermal quenching parameters W and C in most of the quartz samples are very similar to the values accepted in the literature. Furthermore, in some cases the thermal quenching parameters Wand Care not the same for all TL glow-peaks in the same glow-curve. Finally, the strong external treatment of annealing the quartz samples at very high temperature can also influence at least one of the thermal quenching parameters.
  • Küçük Resim
    Yayın
    Thermal quenching of thermoluminescence in quartz samples of various origins
    (Univ Agean, Dept Mediterranean Stud, 2010) Subedi, Bhagawan; Afouxenidis, Dimitrios; Polymeris, George S.; Bakoglidis, Konstantinos D.; Raptis, Spyridoula; Tsirliganis, Nestor C.; Kitis, George
    The effect of thermal quenching plays an important role in the thermoluminescence (TL) of quartz on which many applications of TL are based. In present work it is investigated that the thermal quenching parameters i.e. the activation energy W and the dimensionless parameter C, are more or less the same for every kind of quartzes or sample dependent on strong external treatment like a high temperature annealing. This preliminary investigation of seven quartz samples of different origin showed that the thermal quenching parameters W and C are common (universal) for most of the quartz samples.
  • Küçük Resim
    Yayın
    TL and OSL response of turquoise for dosimetric application
    (University of Aegean, 2010) Subedi, Bhagawan; Afouxenidis, Dimitrios; Polymeris, George S.; Tsirliganis, Nestor C.; Paraskevopoulos, Konstantinos M.; Kitis, George
    Turquoise is one of the amongst first gem stones used in jewelry and possessing cultural value since 2000 BC (at least). This work attempts characterize this stone scientifically using both thermally (TL) and optically stimulated luminescence (OSL) techniques. The experimental investigation included 1) the study of the natural TL and OSL signals, 2) the reproducibility of TL sensitivity over repeated irradiation and TL readout cycles, 3) dependence of sensitivity on annealing temperatures and 4) the TL and OSL dose response curves. The potential use of the TL and OSL techniques in determination of provenance, accidental dosimetry and probably to authenticity and dating purposes are then discussed.