Acoustic and structural design of a highway noise barrier
Yükleniyor...
Dosyalar
Tarih
2020-05-18
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Institute of Physics Publishing
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
Highway noise barriers are designed to mitigate the effects of traffic noise along the highway. Noise barriers primarily block the direct path of the sound between the source on the highway and the receiver exposed to the sound. Noise mitigation capability, aesthetics, cost and constructability and structural capacity against wind and earthquake loads are critical parameters to be considered in noise barrier design. The height and length of a noise barrier are determined by acoustical considerations, aesthetics and cost. In addition, the structural design of the noise barrier should meet the established standards. The aim of this study is to evaluate the noise mitigation capabilities, aesthetic features and costs of acoustic designs for the residential buildings located near the urban highway and evaluate the structural performances against wind and earthquake. Through the interviews, the designs higher than 10m are not found acceptable by the residents and also due to the aesthetic concerns the upper part of the noise barrier is set to be constructed as glass. Therefore, the noise reduction capabilities and construction cost and the alternatives that complies with the constraints are determined and the corresponding costs are calculated accordingly. Noise simulation software is used to identify the effectiveness of selected noise barriers and structural analysis and design software is used to evaluate the structural performance. The results show that designed precast lightweight concrete and glass composite noise barrier meet the required noise reduction goal along with a resilient structural performance and affordable cost.
Açıklama
Anahtar Kelimeler
Kaynak
IOP Conference Series: Materials Science and Engineering
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
800
Sayı
1
Künye
Ayva, B., Umut, Ö. & Kesten, A. S. (2020). Acoustic and structural design of a highway noise barrier. IOP Conference Series: Materials Science and Engineering, 800(1), 1-14. doi:10.1088/1757-899X/800/1/012029
