Single active device metamutator; Its application to impedance simulation and in particular to FDNR
Yükleniyor...
Dosyalar
Tarih
2017
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
IEEE
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
he proposed Metamutator configuration employs only one Fully Differential Current Conveyor (FDCCII) which has 9 terminals including ground. By properly interconnecting these terminals a 4-port Metamutator is obtained without use of any other external element. It maintains the following advantages: (i) use of only one active element: less is the number of active devices less is the amount of disparity, (ii) possibility of realizing Memristors, Capacitors, Inductors, Frequency Dependent Negative Resistor (FDNR), which can be used to make integrated circuit active filters, (iii) no need to impose component choice constraints. SPICE simulations' results using TSMC 0.18 mu m CMOS process parameters and +/- 0.9V supply voltages validate the theoretical predictions.
Açıklama
Anahtar Kelimeler
Floating inductance, Mutator, Memristor, Ports (Computers), Capacitors, Inductors, Memristors, Capacitance, Impedance, Active filters, Circuit simulation, CMOS integrated circuits, Current conveyors
Kaynak
2017 10th International Conference on Electrical and Electronics Engineering (ELECO)
WoS Q Değeri
N/A
Scopus Q Değeri
N/A
Cilt
Sayı
Künye
Minayi, E. & Göknar, İ. C. (2017). Single active device metamutator; its application to impedance simulation and in particular to FDNR. Paper presented at the 2017 10th International Conference on Electrical and Electronics Engineering (ELECO), 499-502.
