The effect of cyclic relative humidity exposure, sanding and grooving on the dimensional stability of solid wood parquet

Basit Öğe Kaydı
dc.authorid0000-0002-6429-009X
dc.authorid0000-0001-7141-5391
dc.authorid0000-0002-5269-1574
dc.contributor.authorKoca, Gülruen_US
dc.contributor.authorArıoğlu, Nihalen_US
dc.contributor.authorAs, Nusreten_US
dc.date.accessioned2019-08-31T12:10:23Z
dc.date.accessioned2019-08-05T16:04:53Z
dc.date.available2019-08-31T12:10:23Z
dc.date.available2019-08-05T16:04:53Z
dc.date.issued2018
dc.departmentIşık Üniversitesi, Güzel Sanatlar Fakültesi, İç Mimarlık Bölümüen_US
dc.departmentIşık University, Faculty of Fine Arts, Department of Interior Architectureen_US
dc.description.abstractIn this study, the effect of cyclic relative humidity changes, sanding and grooving on the dimensional stability of solid wood parquet were evaluated. The experiments were carried out on oak (Quercus petraea) and sapele (Entandrophrag-ma cylindiricum) wood species. Firstly some physical tests (density, shrinkage, and swelling) were carried out on 20×20×30 mm specimens obtained from these two species. After the physical tests the parquet size specimen groups were obtained both in radial and tangential section directions and in two sizes; narrow (250×50×15 mm) and wide (250×90×15 mm). One group of parquet size specimens was sanded and the other group was grooved. There was also a group of specimen for control. After being conditioned to equilibrium moisture content at 65% relative humidity, specimens were placed in a climate chamber and exposed to cyclic relative humidity changes. The dimensions of the specimens were measured between different environmental conditions and the dimensional change was evaluated by taking into consideration the mentioned physical properties. The results show that cyclic relative humidity changes mainly resulted with an increase in the dimensional stability of sanded and cyclic conditioned specimens. There was not a significant change in the dimensional stability of grooved specimens.en_US
dc.description.versionPublisher's Versionen_US
dc.identifier.citationKoca, G., Arıoğlu, N. & As, N. (2018). The Effect of Cyclic Relative Humidity Exposure Sanding and Grooving on the Dimensional Stability of Solid Wood Parquet. ITU A/Z Journal of the Faculty of Architecture, 15(3), 81-90. doi:10.5505/ITUJFA.2018.50570en_US
dc.identifier.doi10.5505/ITUJFA.2018.50570
dc.identifier.endpage90
dc.identifier.issn1302-8324
dc.identifier.issue3
dc.identifier.scopus2-s2.0-85064834537
dc.identifier.scopusqualityQ2
dc.identifier.startpage81
dc.identifier.urihttps://hdl.handle.net/11729/1846
dc.identifier.urihttps://dx.doi.org/10.5505/ITUJFA.2018.50570
dc.identifier.urihttps://app.trdizin.gov.tr/makale/TXpFeU5EYzRPQT09
dc.identifier.volume15
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakTR-Dizinen_US
dc.institutionauthorKoca, Gülruen_US
dc.institutionauthorid0000-0002-6429-009X
dc.language.isoenen_US
dc.peerreviewedYesen_US
dc.publicationstatusPublisheden_US
dc.publisherIstanbul Teknik Universitesi, Faculty of Architectureen_US
dc.relation.ispartofA/Z ITU Journal of the Faculty of Architectureen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectCyclic conditioningen_US
dc.subjectDimensional stabilityen_US
dc.subjectGroovingen_US
dc.subjectSandingen_US
dc.subjectSolid wood parqueten_US
dc.subjectThermal modificationen_US
dc.subjectWeatheringen_US
dc.subjectWooden_US
dc.titleThe effect of cyclic relative humidity exposure, sanding and grooving on the dimensional stability of solid wood parqueten_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
1846.pdf
Boyut:
2.19 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Publisher's Version
İndir

Koleksiyon

GSF - Makale Koleksiyonu | İç Mimarlık Bölümü / Department of Interior Architecture
Scopus İndeksli Yayınlar Koleksiyonu
TR-Dizin İndeksli Yayınlar Koleksiyonu