13 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 13
Yayın A new late holocene eolianite record from Altinkum Beach, North Cyprus(Scientific technical research council Turkey-Tubitak, 2012-06) Erginal, Ahmet Evren; Güneç Kıyak, Nafiye; Ertek, Topçu AhmetIn this study, we investigated the main depositional characteristics and obtained Optically Stimulated Luminescence (OSL) ages of coastal eolianite on the north coast of Cyprus, where this occurrence had not previously been recorded. Based on EDX/SEM and XRD data and field observations, the studied eolianite that crops out between elevations of 1 m and 14 m a.s.l. is made up predominantly of quartz grains, most of which consist of medium- to fine-grained sand. The rock comprises aragonite, calcite and quartz with lesser amounts of bornite and hematite as accessory minerals. OSL ages indicated that the initial deposition of eolianite sands took place at 1.51 +/- 0.21 ka years ago.Yayın Component resolved OSL dose response and sensitization of various sedimentary quartz samples(Elsevier Ltd, 2007-02) Güneç Kıyak, Nafiye; Polymeris, George S.; Kitis, GeorgeThe structure of the linearly modulated optically stimulated luminescence (LM-OSL) signal was studied for four sedimentary quartz samples, collected from different sites around Istanbul, Turkey. Applying a computerized deconvolution analysis to the LM-OSL curves, at least six individual components of first-order kinetics were identified and photoionization cross-section of each component was evaluated. The OSL dose-response curve of each component for each quartz sample was obtained, showing a remarkable differentiation from component to component. The behavior of a highly dosed sample to successive LM-OSL measurements was also studied showing a stable recuperation signal in the position of the "slow" and "medium" components and high resistance to OSL bleaching of the "slow" component. The individual sensitivity of each component as a function of the activation temperature was obtained. The sensitivity of each component was normalized over the respective sensitivity of the glow-peak at 110 degrees C of quartz in order to investigate the ability of the 110 degrees C glow-peak to act as a correction factor for all components of the LM-OSL curves examined.Yayın Optically stimulated luminescence to date coastel dunes and a possible tsunami layer on the Kavak Delta (Saros Gulf, NW Turkey)(Scientific Technical Research Council Turkey-Tubitak, 2009-01-21) Erginal, Ahmet Evren; Güneç Kıyak, Nafiye; Özcan, HasanOptically stimulated luminescence (OSL) dating was used to determine the timing of initial dune formation and reconstruct the evolution of coastal dunes that developed on the Kavak Delta, Saros Gulf, Turkey. Along a 500-mlong representative transect, dune sands were extracted from foredune, semistable (grey) dune, stable (dark) dune and dune-swamp boundary defined by a scarp 50?75 cm high. The data obtained showed that dune drift initiated 670 years ago. A pumice layer 15?20-cm-thick interbedded with marine clay and sand showed an OSL age of 340 years coinciding with underlying dune sand. XRF analysis showed that pumices were of similar composition to those erupted by plinian activity of Thera (Santorini) in 1628 BC. On the basis of OSL ages, these deposits, which are widely distributed on the western Anatolian coasts of Turkey, might have presumably transported landward along tide channels on the delta during a tsunami event that occurred in 1672 near Bozcaada and Kos islands according to tsunami history of the Aegean Sea.Yayın Effect of annealing temperature on determining trap depths of quartz by various heating rates method(Pergamon-Elsevier Science, 2001-12) Güneç Kıyak, Nafiye; Buluş, E.The aim of this study is to determine the trap parameters (trap depth E, frequency factors) of quartz using various heating rates method and also to investigate the effect of annealing temperature on determining trap depths. The method is based on the positions of the thermoluminescence peaks, obtained from the change in temperature of the peak at maximum caused by changing the heating rate at which the sample is measured. In the present work, powder quartz samples were annealed first at different temperatures before irradiation. Then samples irradiated to different doses were measured with a TL reader at different heating rates and the glow curves were recorded. In order to calculate the trap depth E and the frequency factor s, the glow parameter T-m was determined experimentally from the glow curve by measuring the shift of the maximum peak temperature depending on heating rate beta. The calculation of trap parameters was repeated for each annealing temperature. Then the effect of annealing temperature on trap depths calculated by the various heating rates method was evaluated.Yayın Dissolution and subsequent re-crystallization as zeroing mechanism, thermal properties and component resolved dose response of salt (NaCl) for retrospective dosimetry(Pergamon-Elsevier Science Ltd, 2011-09) Polymeris, George S.; Kitis, George; Güneç Kıyak, Nafiye; Sfamba, Ioanna; Subedi, Bhagawan; Pagonis, VasilisIn the present study we report dosimetric properties of iodized salt aiming at using it as an accidental luminescent dosimeter. It was found that the very good sensitivity of its main dosimetric peak is strongly affected by thermal treatments. This is also the case for OSL emission. The sensitivity loss due to heating implies that caution should be exercised while applying single aliquot protocols for dose evaluation. The sequence of dissolution and subsequent re-crystallization was established to be an extremely effective zeroing mechanism for the TL signal. The linearity in the dose response was also monitored in the case of dissolved and subsequently re-crystallized salt. In the case of naturally occurring salt, zeroing of the TL signal due to dissolution as well as the linearity of dose response up to doses as large as 100 Gy were found to be very promising features for dating applications.Yayın On the origin and age of the Ariburnu Beachrock, Gelibolu Peninsula, Turkey(Scientific Technical Research Council Turkey-TUBITAK, 2008-03-13) Erginal, Ahmet Evren; Güneç Kıyak, Nafiye; Bozcu, Mustafa; Ertek, Topçu Ahmet; Güngüneş, Hakan; Sungur, Ali; Türker, GülenThe beachrock formation on the Ariburnu coast situated in the Gelibolu Peninsula has been studied by field observation, thin-section interpretation, physicochemical analyses including ICP-AES and SEM/EDS, and OSL dating. These analyses reveal the presence of different amounts of major (Si, Ca, Mg, K, Fe, Al and Na) and trace elements within the beachrock cement with Si (36.2%) and Ca (32.68%) dominating the overall composition. Beachrocks composed of highly-fractured and friable beds reach a total thickness of 80 cm extending from + 60 cm at the uppermost level down to-1 m at their most seaward extent and grade from conglomerate to lithic arkose in vertical section. The total amount of CaCO(3) ranges between 59.08% and 36% and the cement consists of high-Mg calcite based on EDS analysis. From SEM examination, four main morphologies were identified in cement material: (1) micritic coatings, (2) cryptocrystalline pore-filling cement, (3) meniscus cement and (4) microbial cement and suggest the presence of marine phreatic conditions with the exception of meniscus bridges, which imply that cementation may have been dominated by carbonate-rich meteoric waters at any successive stage of cementation. Five buried beachrock samples under unconsolidated beach sand were sampled for Optically Stimulated Luminescence (OSL) dating and show that the minimum and maximum ages of beachrock are 1.42 +/- 0.20 ka and 2.28 +/- 0.28 ka BP, respectively.Yayın Equivalent dose in quartz from young samples using the SAR protocol and the effect of preheat temperature(Pergamon-Elsevier Science Ltd, 2006-09) Güneç Kıyak, Nafiye; Canel, TimurMajor concerns in the dating of samples younger than a few hundred years by the optically stimulated luminescence (OSL) technique are thermal transfer and partial bleaching. Thermal transfer during preheating enhances the OSL signal due to the charge transfer from thermally sensitive, but light-insensitive, traps to optical centres of quartz and results in an overestimate in equivalent dose, especially for very young samples. In this study, the single-aliquot regenerative-dose protocol is used to obtain values of equivalent dose (D-e) from young samples taken from various environments around Istanbul. Within this framework, we aim to investigate the effect of preheat temperature on equivalent dose from 150 to 300 degrees C, the reproducibility of De measurements for young deposits and the contribution from thermal transfer of charge to the equivalent dose estimation. It was observed that the measured dose is influenced significantly by preheat temperature and the increase in the De is clearly due to thermal transfer of charge from deep thermally sensitive traps to OSL trap during preheating of the samples prior to the main OSL measurements.Yayın Luminescence ages of feldspar contaminated quartz from fluvial terrace sediments(Wind-J Wojewoda Publ Co, 2008-01-01) Güneç Kıyak, Nafiye; Erturaç, Mehmet KorhanThis study focuses on obtaining luminescence ages in feldspar contaminated quartz from well-developed fluvial terraces of the Yesilirmak (Iris) river located inside the eastern North Anatolian Fault Shear Zone (NAFZ). We applied a technique based on conventional single-aliquot regenerative-dose (SAR) protocol, modified with an IR pre-treatment to reduce the OSL contribution from feldspar for accurately measuring the dose in quartz. All investigated samples showed an ability to measure a beta dose given in the laboratory, a so called dose recovery test. The dependence of the equivalent dose on thermal treatment was also examined. Dose rate calculations were based on spectral analysis of gamma measurements by a field spectrometer on site. The efforts to establish a chronology using the IR modified SAR technique produced reliable dose results in stratigraphic order. Results were reproducible and grouped broadly between 35-109 ka for Bektemur, 32-36 ka for Kizilca, 19-47 ka for Aksalur and 35-44 ka for Sahinkaya. Obtained results show that the studied area was controlled by tectonic activities within the last 50 ka and the sample Aksalur 2 was the loess deposit formed by aeolian activity.Yayın Component-resolved thermal stability and recuperation study of the LM-OSL curves of four sedimentary quartz samples(Elsevier Ltd, 2007-09) Kitis, George; Polymeris, George S.; Güneç Kıyak, NafiyeThermal stability as well as recuperation stands among the crucial general characteristics of different OSL components in quartz. Through a series of thermal stability and recuperation experiments, in conjunction with curve fitting studies, a component resolved analysis is carried out, studying these two aspects for the OSL components identified ill quartz samples collected from sites around Istanbul. A thermally unstable ultra-fast component is reported, which is almost totally removed by heating up to 250-280 degrees C. Most slow and medium components show a stability temperature region between 200 and 350 degrees C, whereas the thermal stability of the final slow component is limited Lip to almost 300 degrees C. No detectable recuperation occurs for the first five components reported. The greatest recuperation occurred in the sixth component, despite the fact that it was less than 1%.Yayın TL/OSL properties of crystalline inclusions from heavy, barytes loaded, concrete(Pergamon-Elsevier Science Ltd, 2010-03) Güneç Kıyak, Nafiye; Polymeris, George S.; Kitis, GeorgeIn the present work, we report the luminescence data obtained from heavy, barytes loaded, concrete containing many crystalline inclusions, extracted from a shielding block located at CERN. The use of both Thermoluminescence (TL) and Optically Stimulated Luminescence (OSL) signals, resulting from a specific trap at about 200 degrees C, is investigated for retrospective dosimetry purposes. By applying thermal cleaning experiments the TL signal of interest was isolated. Basic TL and OSL properties as thermal and optical stability, repeatability and mainly the linearity of the TL and OSL signals as a function of beta dose were investigated. The implications of all these luminescence properties to retrospective dosimetry are also briefly discussed.
