15 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 15
Yayın Design and implementation of wideband microwave amplifiers based on Normalized Gain Function(Institute of Electrical and Electronics Engineers Inc., 2014) Köprü, Ramazan; Kılınç, Sedat; Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaIn this work, we introduce the design and implementation of wideband microwave amplifiers based on "Normalized Gain Function (NGF)" method. Normalized Gain Function is defined as the ratio of desired shape or frequency response of the gain function of the amplifier to be designed and shape of the transistor forward gain function. Synthesis of input/output matching networks (IMN/OMN) of the amplifier require target gain curves as the functions of normalized gain function to be tracked in two sequential nonlinear optimization processes. A prototype low power amplifier circuit is produced and measured to show the usability of the design approach.Yayın A design technique of 50 Ω terminated bandpass matching network and its implementation to a Y-shaped monopole antenna matching(Springer, 2016-12) Aydın, Çağatay; Atilla, Doğu Çağdaş; Köprü, Ramazan; Kılınç, Sedat; Karakuş, Cahit; Yarman, Bekir Sıddık BinboğaIn this paper, a 50 Ω terminated or in other words transformerless bandpass matching network design methodology and an implementation example are presented. The real frequency techniques are powerful numerical methods to design wideband lossless two-port networks such as filters, matching networks and amplifiers. In these techniques, the value of the termination resistance of the designed network could not be yielded as 50 Ω by numerical package. Hence, a transformer is also required for 50 Ω termination which is not practical for high frequency applications. By employing the proposed procedure, it is guaranteed to obtain transformerless bandpass matching network. Also in this study a wideband suspended monopole antenna is examined. The proposed antenna consists of two major elements; Y-shaped impedance matching plate and hemi-circular radiator. Moreover Y-shaped impedance matching plate connected to a feeding probe excites the suspended hemi-circular radiator via air gap. Consequently, a transformerless bandpass matching network is designed to filter and expand the operational frequency bandwidth of the proposed antenna. It has been observed that ideal circuit and the layout of the matching network simulation have good agreement.Yayın Mixed element wideband microwave amplifier design via simplified real frequency technique(IEEE Computer Society, 2014) Kılınç, Sedat; Köprü, Ramazan; Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaIn this study, we illustrate the design and implementation of a wideband microwave small-signal amplifier composed of mixed elements. The design is based on Simplified Real Frequency Technique (SRFT). A design of low power amplifier circuit is completed and its simulations are performed in success. The circuit is designed with lumped elements, however, some of the lumped elements are converted to distributed elements for their convenience in production. In this way, a mixed element wideband microwave amplifier comprised of input/output matching networks with lumped and distributed elements has been formed. Layout work and also post layout simulation is given with satisfying results.Yayın Wideband bandpass filter design for X band horn antenna via numerical techniques(IEEE Computer Society, 2015) Köprü, Ramazan; Aydın, Çağatay; Atilla, Doğu Çağdaş; Kılınç, Sedat; Yarman, Bekir Sıddık BinboğaDesign of an X band horn antenna and a wideband unit element microstrip bandpass filter (UEBPF) for this antenna are presented with satisfactory agreement between theoretical and simulation results. Numerical methods known as real frequency techniques (RFTs) have been utilized in Richards domain to yield optimum driving point Darlington input impedance function belonging to the UEBPF that enables a maximum RF power transmission between the designed horn antenna and an RF driving source. Using a high precision Richards immittance synthesis package in Matlab, characteristic impedance values of each UE, out of k number of commensurate (equal length) transmission lines forming the UEBPF, is extracted from the input impedance function. Theoretical design (Matlab of Mathworks Inc.) and simulation (ADS of Agilent Inc., HFSS of ANSYS Corp.) results are shown to be very promising and in a high degree of agreement with each other.Yayın Ultra wideband matching network design for a V-shaped square planar monopole antenna(Cambridge University Press, 2014-12) Köprü, Ramazan; Kılınç, Sedat; Aydın, Çağatay; Atilla, Doğu Çağdaş; Karakuş, Cahit; Yarman, Bekir Sıddık BinboğaIn this paper, design, manufacture, and measurement of a wideband matching network for a broadband V-shaped square planar monopole antenna (V-SPMA) is presented. Matching network design is unavoidable in most cases even vital to facilitate a maximally flat power transfer gain for an antenna. In the work, a bandpass matching network (BPMN) design is done for a particular square monopole antenna with V-shaped coupling element that has essentially bandwidth increasing effect. Designed BPMN and the antenna forms a VSPMA-BPMN matched antenna structure. "real frequency technique" is employed in the BPMN design. BPMN prototype circuit has been constructed on an FR4 laminate with commercial microwave chip inductors and capacitors. Vector network analyzer gain and reflectance measurements of the matched antenna structure have shown highly compatible results to those of the theoretical design simulations along the passband (similar to 0.8-4.7 GHz). Furthermore, newly proposed distributed capacitor-resistor lossy model for microstrip lines used in the BPMN circuit have exhibited that it can successfully mimic the measured gain and reflectance performance of the matched structure in passband and even in stopband upto 8 GHz. Designed structure can be utilized as a one single wideband broadcasting medium suitable for many communication standards such as GSM, 3G, and Wi-Fi.Yayın Unit element bandpass filter design via simplified real frequency technique for UWB microstrip patch antenna(IEEE Computer Society, 2014) Köprü, Ramazan; Kılınç, Sedat; Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaDesign of a UWB (Ultra Wideband) microstrip patch antenna to operate in the first channel of the UWB standard and a bandpass (BP) UE (Unit Element) microstrip filter (BPUEF) for this antenna are studied and presented with promising experimental results. A typical UE BP filter is a lossless 2-port network which is formed with certain number of cascade connected commensurate transmission lines. Based on the simplified real frequency technique (SRFT) in Richards domain, driving point Darlington impedance function of the BPUEF is obtained via optimization such that optimum power transfer would be possible between a PA (power amplifier) and the antenna. Using the UE synthesis, characteristic impedance values of each UE is extracted from the input impedance function. Theoretical design (Matlab), simulation (ADS, Agilent Inc.) and the measurements are shown to be in a high degree of agreement.Yayın Dual band filter design for GSM bands using frequency mapping and real frequency technique(IEEE, 2018) Yıldız, Serkan; Kılınç, Sedat; Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaIn this study, dual band frequency mapping is incorporated with Real Frequency Technique to design a dual band filter for GSM900 and GSM1800/UMTS bands. The proposed real frequency design technique (RFT) involves a parametric representation of input impedance of filter and the use of a dual band (DB) frequency mapping. A direct DB frequency mapping from low pass proto-type network is utilized along with the design and optimization of a low pass prototype network. Microstrip implementation of the designed filter and measurement results of the design are presented.Yayın Multiband filter design using generalized mapping functions and synthesis with lumped resonators(Czech Technical University, 2020-06-01) Yıldız, Serkan; Aksen, Ahmet; Kılınç, Sedat; Yarman, Bekir Sıddık BinboğaIn this paper, a new multiband frequency mapping function is proposed to design multiband filter. The presented mapping function is a generalized form of the sequential low pass to band pass (LPtoBP) transformation. The multiband filter design is based on the application of the frequency mapping function on a LP prototype. The synthesis of the resulting multiband filter is obtained by lumped element resonators. Several examples are presented to validate the proposed design approach. A triple band filter implementation and measurement results are presented.Yayın Low pass filter design with improved stop-band suppression and synthesis with transformer-free ladders(John Wiley and Sons Inc, 2021-09) Yıldız, Serkan; Aksen, Ahmet; Kılınç, Sedat; Yarman, Bekir Sıddık BinboğaA new method to design transformer-free low pass (LP) ladder network with improved stop-band suppression performance is introduced. The parametric representation of back-end impedance of LP filter network is established with minimum impedance part and a Foster reactance part. The constructed impedance function is optimized by using real frequency technique. It has been shown that the proposed method provides LP filters which have superior stop-band suppression in comparison with classical transfer function-based filters with same complexity. The synthesis of the LP filter is obtained with the proposed element extraction procedure and resulted with fully realizable network elements in ladder form. An LP filter design and application by employing the proposed technique is provided. The measurement results of the prototyped filter are presented.Yayın 0.8-1.9 GHz mikrodalga kuvvetlendirici tasarımı(IEEE, 2016-12-03) Koç, Onur; Kılınç, Sedat; Köprü, Ramazan; Yarman, Bekir Sıddık BinboğaGünümüzde haberleşmede kullanılan iletişim araçlarının tasarımı büyük bir gelişim ve değişim göstermektedir. İletişim araçları birçok sistemden oluşmaktadır. Bu çalışmada iletişimin sağlanmasında büyük öneme sahip olan sistem olarak Mikrodalga kuvvetlendirici tasarımı yapılmıştır. Mikrodalga kuvvetlendirici tasarımı 0.8-1.9 GHz bant genişliğinde hücresel haberleşme için gerçekleştirilmiştir. Kuvvetlendirici devresi ADS (Advanced Design System) programı kullanılarak tasarlanmıştır. Kuvvetlendirici tasarımı ideal devre, mikroşerit devre, serim devre tasarımı ve devre üretimi aşamalarından oluşmaktadır. Bu çalışmada yapılan tasarımların üretim sonuçları program tasarımına benzer çıkmıştır.
