10 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 10
Yayın TL and OSL response of turquoise for dosimetric application(University of Aegean, 2010) Subedi, Bhagawan; Afouxenidis, Dimitrios; Polymeris, George S.; Tsirliganis, Nestor C.; Paraskevopoulos, Konstantinos M.; Kitis, GeorgeTurquoise is one of the amongst first gem stones used in jewelry and possessing cultural value since 2000 BC (at least). This work attempts characterize this stone scientifically using both thermally (TL) and optically stimulated luminescence (OSL) techniques. The experimental investigation included 1) the study of the natural TL and OSL signals, 2) the reproducibility of TL sensitivity over repeated irradiation and TL readout cycles, 3) dependence of sensitivity on annealing temperatures and 4) the TL and OSL dose response curves. The potential use of the TL and OSL techniques in determination of provenance, accidental dosimetry and probably to authenticity and dating purposes are then discussed.Yayın Component resolved OSL dose response and sensitization of various sedimentary quartz samples(Elsevier Ltd, 2007-02) Güneç Kıyak, Nafiye; Polymeris, George S.; Kitis, GeorgeThe structure of the linearly modulated optically stimulated luminescence (LM-OSL) signal was studied for four sedimentary quartz samples, collected from different sites around Istanbul, Turkey. Applying a computerized deconvolution analysis to the LM-OSL curves, at least six individual components of first-order kinetics were identified and photoionization cross-section of each component was evaluated. The OSL dose-response curve of each component for each quartz sample was obtained, showing a remarkable differentiation from component to component. The behavior of a highly dosed sample to successive LM-OSL measurements was also studied showing a stable recuperation signal in the position of the "slow" and "medium" components and high resistance to OSL bleaching of the "slow" component. The individual sensitivity of each component as a function of the activation temperature was obtained. The sensitivity of each component was normalized over the respective sensitivity of the glow-peak at 110 degrees C of quartz in order to investigate the ability of the 110 degrees C glow-peak to act as a correction factor for all components of the LM-OSL curves examined.Yayın The firing temperature of pottery from ancient Mesopotamia, Turkey, using luminescence methods: a case study for different grain-size fractions(Wiley-Blackwell, 2014-10) Polymeris, George S.; Güneç Kıyak, Nafiye; Koul, Dileep K.; Kitis, GeorgeThe assessment of the firing temperature of a prehistoric pottery sample collected from ancient Mesopotamia, Turkey was studied using luminescence techniques. The methods for this estimation involved the observation of the thermal and pre-dose sensitization with various re-firing temperatures for both TL and the OSL signals. In the former case, the 110 degrees C TL peak and the rest of the glow curve were used as proxies in this study. In the framework of a first attempt to investigate the impact of grain-size dependence on the sensitization of the luminescence signals, the aforementioned study was performed with four different pottery grain-size fractions: (i) less than 60m, (ii) 60-90m, (iii) 90-180m and (iv) 180-250m. The results clearly demonstrated the firing temperature mark of approximate to 500 degrees C in for the grain size of 90-180m, whileas in the case of the lower grain-size fractiona third proxy, the ratio of the pre-dosed to the thermal sensitization, was seen to indicate the firing temperature. The remaining two grain-size fractions failed to provide any meaningful results with regard to the firing temperature estimation. The dependence of the TL characteristics on the grain size was explained in the framework of the mixed mineralogy.Yayın Thermally assisted OSL from deep traps in Al2O3:C(Pergamon-Elsevier Science Ltd, 2010-03) Polymeris, George S.; Raptis, Spyridoula; Afouxenidis, Dimitrios; Tsirliganis, Nestor C.; Kitis, GeorgeThe present work suggests an alternative experimental method in order to not only measure the signal of the deep traps in Al2O3:C without heating the sample to temperatures greater than 500 degrees C, but also use this signal for high dose level dosimetry purposes as well. This method consists of photo transfer OSL measurements performed at elevated temperatures using the blue LEDs (470 nm, FWHM 20 nm) housed at commercial Riso TL/OSL systems, after the sample was previously heated up to 500 degrees C in order to empty its main TL dosimetric trap. The influence of this procedure on specific features such as glow curve shape and sensitivity of the main TL glow peak was also studied.Yayın IRSL dating of a deep water core from Pylos, Greece; comparison to post ir blue OSL and TL dating results(Univ Agean, 2011) Polymeris, George S.; Kitis, GeorgeThe 'double SAR' protocol procedure permits the determination of two equivalent dose (De) values for each polymineral aliquot; an IRSL De resulting mostly from feldspars along with a post-IR OSL De for a mixed signal for quartz (mostly) and feldspar grains. The objective of the present study is to test for the first time its usefulness for polymineral, coarse silt, closely-spaced deep-sea sediment samples. A new, 'double SAR' IRSL dataset is presented for the sedimentation ages of a deep-sea sediment core of the Hellenic Trench, drilled from a water depth of 4 km, near the deepest site of the Mediterranean Sea, outside Pylos, Greece. Post IR quartz-based optical dating was previously proved to be consistent with AMS radiocarbon ages, obtained from planktonic foraminifera from the same core. IRSL De values are, with one exception, always much greater than the corresponding (post-IR) OSL results. This result suggests that for the present study 'double SAR' protocol procedure was proved to be extremely effective method for separating the luminescence signals from quartz and feldspars. Furthermore, De values obtained after infra-red stimulation and thermoluminescence generally agree within errors. This quantitative equivalence of those two sets of De values implies that as in the case of IRSL, TL signal is also feldspar-dominated. IRSL ages vary between 3.5 and 7.8 ka with associated errors up to 9%. Application of 'double SAR' protocol to coarse silt, closely-spaced deep-sea sediment samples seems advisable, despite the fact that the post-IR blue OSL signal is the most stable signal, and is preferred for dating.Yayın Investigation of the OSL signal from very deep traps in natural quartz(Univ Agean, Dept Mediterranean Stud, 2010) Kitis, George; Güneç Kıyak, Nafiye; Polymeris, George S.; Pagonis, VasilisIt has been recently reported by several studies that a thermally transferred optically stimulated luminescence (TT-OSL) signal from quartz grains can be used to extend the dating range for quartz samples. The TT-OSL signals are believed to consist of a recuperated OSL (ReOSL) component and a basic-transferred OSL (BT-OSL) component. In the present work the TT-OSL signals from several types of unfired quartz samples were studied. A special protocol was used, which allowed the measure the OSL from very deep traps (VDT) as a function of the OSL stimulation temperature. It was found that all quartz samples exhibit TT-OSL signals, which are depended on sample and on the OSL stimulation temperature. The activation energy of the process was evaluated and the influences of the TT-OSL on the ReOSL dating protocol are discussed.Yayın Reconstruction of thermally quenched glow curves in quartz(Pergamon-Elsevier Science Ltd, 2012-04) Subedi, Bhagawan; Polymeris, George S.; Tsirliganis, Nestor C.; Pagonis, Vasilis; Kitis, GeorgeThe experimentally measured thermoluminescence (TL) glow curves of quartz samples are influenced by the presence of the thermal quenching effect, which involves a variation of the luminescence efficiency as a function of temperature. The real shape of the thermally unquenched TL glow curves is completely unknown. In the present work an attempt is made to reconstruct these unquenched glow curves from the quenched experimental data, and for two different types of quartz samples. The reconstruction is based on the values of the thermal quenching parameter W (activation energy) and C (a dimensionless constant), which are known from recent experimental work on these two samples. A computerized glow-curve deconvolution (CGCD) analysis was performed twice for both the reconstructed and the experimental TL glow curves. Special attention was paid to check for consistency between the results of these two independent CGCD analyses. The investigation showed that the reconstruction attempt was successful, and it is concluded that the analysis of reconstructed TL glow curves can provide improved values of the kinetic parameters E, s for the glow peaks of quartz. This also leads to a better evaluation of the half-lives of electron trapping levels used for dosimetry and luminescence dating.Yayın Component-resolved thermal stability and recuperation study of the LM-OSL curves of four sedimentary quartz samples(Elsevier Ltd, 2007-09) Kitis, George; Polymeris, George S.; Güneç Kıyak, NafiyeThermal stability as well as recuperation stands among the crucial general characteristics of different OSL components in quartz. Through a series of thermal stability and recuperation experiments, in conjunction with curve fitting studies, a component resolved analysis is carried out, studying these two aspects for the OSL components identified ill quartz samples collected from sites around Istanbul. A thermally unstable ultra-fast component is reported, which is almost totally removed by heating up to 250-280 degrees C. Most slow and medium components show a stability temperature region between 200 and 350 degrees C, whereas the thermal stability of the final slow component is limited Lip to almost 300 degrees C. No detectable recuperation occurs for the first five components reported. The greatest recuperation occurred in the sixth component, despite the fact that it was less than 1%.Yayın Investigation of OSL signals from very deep traps in unfired and fired quartz samples(Elsevier Science BV, 2010-03-15) Kitis, George; Güneç Kıyak, Nafiye; Polymeris, George S.; Pagonis, VasilisThis paper presents an attempt to isolate experimentally optically stimulated luminescence (OSL) signals which may originate from very deep traps (VDT) in quartz samples. As VDT we consider those traps which are responsible for TL glow peaks with a peak maximum temperature above a TL readout temperature of 500 C. The basic experimental procedure used to isolate OSL signals from VDT is heating the quartz samples to 500 C immediately before measuring the OSL signal. The study was carried out on eight quartz samples of very different origins; it is found that all eight samples exhibit OSL signals from VDT, and for a wide region of OSL stimulation temperatures. The OSL signal from VDT depends strongly on the type of quartz sample studied and on whether the sample was fired at high temperatures or not. The behavior of the OSL signal from VDT as a function of the stimulation temperature is found to be very different in fired and unfired samples. The thermal activation energy E for the OSL signals from VDT is obtained in both fired and unfired samples. The OSL signal from VDT in quartz samples fired at 800 C for 1 h is very high, and the OSL curves consist of three well-defined components and a fourth slow component which is rather poorly resolved. The dose response of these components is obtained using a computerized deconvolution procedure for the dose region 0.5-300 Gy. The results are of importance for dating of ancient fired ceramics, since OSL signals from VDT could potentially extend appreciably the equivalent dose region toward both lower and higher values.Yayın LM-OSL thermal activation curves of quartz: Relevance to the thermal activation of the 110 degrees C TL glow-peak(Pergamon-Elsevier Science Ltd, 2008-01) Güneç Kıyak, Nafiye; Polymeris, George S.; Kitis, GeorgeThe thermally activated characteristics (TAC) of the linearly modulated optically stimulated luminescence (LM-OSL) signals of seven quartz samples from different origin were studied relative to the TAC of their respective thermoluminescence (TL) glow-peaks at 110 degrees C. Within the framework of the study the TAC behavior of the LM-OSL was investigated by measuring the OSL signal at room temperature (RT) with the 110 degrees C glow-peak present during OSL measurements, as well as, at 125 degrees C without the glow-peak at 110 degrees C removed by a cut-heat at 180 degrees C prior to OSL measurement. The LM-OSL curves were analyzed into individual components using a computerized deconvolution procedure. It was found that all individual LM-OSL components of each kind of quartz follow the TAC behavior of the respective TL glow-peak at 110 degrees C. The fourth component of the LM-OSL curve, centered at about t(m) = 400 s, appeared when the OSL measurements were performed at RT, whereas it was absent when the OSL measurement were performed at 180 degrees C. It is suggested that this component is closely related with the TL glow-peak at 110 degrees C.
