2 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 2 / 2
Yayın Evaluation of wooden structures(Springer, 2019) Koca, GülruIn order to preserve the architectural heritage and sustainability of cities, the accurate evaluation of the mechanical properties of existing buildings is crucial. While inorganic building materials such as natural stones can be evaluated more easily, it is difficult to accurately assess the mechanical properties of wood. Mistaken evaluations of structural wooden members may lead to large-scale replacements in the maintenance and restoration of buildings. The techniques used in the evaluation of wood are; destructive, semi-destructive and non-destructive tests. Although destructive tests give accurate information about the mechanical properties of wood, they are not preferred in the evaluation of the existing structures because they cause the loss of structural integrity. The semi-destructive and non-destructive methods are being widely used for the last decades in the evaluation of structural wooden members. As these techniques do not give harm to the structural members, they allow the in situ evaluation of wooden structures. While semi-destructive tests are carried out with the extraction of a small piece without influencing the mechanical properties of wood, non-destructive techniques are carried out with the help of small devices in order to detect the interior defect and deteriorations. In this study, it is aimed to give information about some of the most used semi-destructive and non-destructive test methods.Yayın The effect of cyclic relative humidity exposure, sanding and grooving on the dimensional stability of solid wood parquet(Istanbul Teknik Universitesi, Faculty of Architecture, 2018) Koca, Gülru; Arıoğlu, Nihal; As, NusretIn this study, the effect of cyclic relative humidity changes, sanding and grooving on the dimensional stability of solid wood parquet were evaluated. The experiments were carried out on oak (Quercus petraea) and sapele (Entandrophrag-ma cylindiricum) wood species. Firstly some physical tests (density, shrinkage, and swelling) were carried out on 20×20×30 mm specimens obtained from these two species. After the physical tests the parquet size specimen groups were obtained both in radial and tangential section directions and in two sizes; narrow (250×50×15 mm) and wide (250×90×15 mm). One group of parquet size specimens was sanded and the other group was grooved. There was also a group of specimen for control. After being conditioned to equilibrium moisture content at 65% relative humidity, specimens were placed in a climate chamber and exposed to cyclic relative humidity changes. The dimensions of the specimens were measured between different environmental conditions and the dimensional change was evaluated by taking into consideration the mentioned physical properties. The results show that cyclic relative humidity changes mainly resulted with an increase in the dimensional stability of sanded and cyclic conditioned specimens. There was not a significant change in the dimensional stability of grooved specimens.
