8 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 8 / 8
Yayın Time evolution of film formation from polystyrene particles: a percolation approach(Springer, 2005-12) Uğur, Şaziye; Pekcan, Mehmet ÖnderThis work reports the film formation process from surfactant-free polystyrene (PS) latex particles. Steady state fluorescence and photon transmission techniques were used to study the evolution of film formation. The films were prepared from fluorescein (F)-labeled PS latex particles at room temperature and annealed in 2.5-min-time intervals above the glass transition temperature (T-g) of PS. Fluorescence intensity (I-F) from F was measured after each annealing step to monitor the stages of film formation. Evolution of transparency of latex films was monitored by using the photon transmission intensity, I-tr. Drastic increase in I-tr and I-F above the critical annealing times t(r) and t(c) respectively, were attributed to the percolation behavior of the PS material. Critical exponents, beta, of percolation clusters were measured and found to be around 0.31 and 0.37 for Itr and IF measurement, respectively, which were attributed to the site percolation model.Yayın Film formation from TiO2-polystyrene latex composite: a fluorescence study(Taylor & Francis Group, 2007-03-01) Uğur, Şaziye; Sunay Yapışkan, Münüre Selin; Tepehan, Fatma Zehra; Pekcan, Mehmet ÖnderThis work reports the use of the steady state fluorescence (SSF) technique for studying film formation from TiO2 covered polystyrene (PS) latex particles. The composite films were prepared from pyrene (P)-labeled PS particles by covering them with TiO2 at room temperature and then annealed at elevated temperatures in 10 min time interval above glass transition (T-g) temperature of polystyrene. Five different composite films were studied in various TiO2 layer contents. Fluorescence intensities Ip from P were measured after each annealing step to monitor the stages of film formation. Films showed considerable increase in Ip above the certain onset temperature called minimum film forming temperature, T-0. Void closure and interdiffusion stages were modeled and related activation energies were determined and found to be 23.12 and 92.80 kJ mol(-1), respectively.Yayın Effects of annealing on morphology of polymer/polymer (PS/PMMA) blend; a fluorescence study(John Wiley& Sons Inc, 2006-05-05) Uğur, Şaziye; Pekcan, Mehmet ÖnderSteady state fluorescence (SSF) technique conjunction with optical microscopy were used to study the morphology of polystyrene (PS)/poly(methyl methacrylate) (PMMA) blend upon annealing above glass transition in elevated time intervals. The PS/PMMA blends were prepared from dissolution of pyrene (P) and naphthalene (N) labeled PS and PMMA particles, respectively. Monte Carlo Simulations were performed to model the N and P fluorescence intensities (I-N and I-P), Using photon diffusion theory. Number of N and P photons (N-N and N-P) emerging from the front surface of the blend are calculated when only N is excited, where N-P photons are combined of photons from radiative (N-PR) and nonradiative (N-PNR) energy transfer processes. Optical microscopy images were taken at each annealing step to Support Our findings from fluorescence measurements.Yayın Films formed from polystyrene latex/clay composites: A fluorescence study(Springer New York, 2005-07) Uğur, Şaziye; Alemdar, Ayşe; Pekcan, Mehmet ÖnderThis study reports a steady-state fluorescence (SSF) technique for studying film formation from surractant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (T-g) of polystyrene. During the annealing processes, the transparency of the fllm improved considerably. Scattered light (I-s) and fluorescence intensity (I-s) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I-tr Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite-films. Minimum flIm formation temperature, T-o, and healing temperatures, T-h, were determined. Void closure and interdiff-usion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.Yayın Film formation from nano-sized polystyrene latex particles(John Wiley & Sons Ltd, 2005-05) Uğur, Şaziye; Elaissari, Abdelhamid; Pekcan, Mehmet ÖnderThis work reports on the steady state fluorescence (SSF) technique for studying film formation from surfactant-free, nano-sized polystyrene (PS) latex particles prepared via emulsion polymerization. The latex films were prepared from pyrene M-labeled PS particles at room temperature and annealed at elevated temperatures in 5, 10, 15, 20 and 30 min time intervals above the glass transition temperature (T-g) of PS. During the annealing processes, the transparency of the film was improved considerably. Monomer and excimer fluorescence intensities, I-p and I-E respectively, from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of the latex films was monitored by using photon transmission intensity, It,. Void closure and interdiffusion stages were modeled and related activation energies were determined and found to be 10.3 and 50.3 kJ mol(-1). Void closure temperatures, T-v, were determined from the minima of I-tr value. CopyrightYayın Film formation from PS latex doped PNIPAM hydrogels at various heating and cooling rates(VSP BV, Brill Academic Publishers, 2008-05-01) Uğur, Şaziye; Yargı, Önder; Pekcan, Mehmet ÖnderFilm formation from polystrene (PS) latex doped poly(N-isopropylacrylamide) (PNIPAM) hydrogels was studied by using photon transmission technique. The transmitted light intensity, It, was monitored during film formation process. Films were prepared by annealing, 10 wt% PS doped PNIPAM particles at five different heating and cooling rates at temperatures ranging from 10 to 100 degrees C. I-tr presented a hysteresis loops during heating-cooling cycles, which were explained by void closure and void reconstruction processes. The corresponding activation energies were measured during reversible film formation process. Void closure and void reconstruction models were introduced to produce the activation energies.Yayın Small molecule desorption prior to dissolution of a polymeric glass(Wiley Subscription Services, Inc., A Wiley Company, 2006-07-15) Pekcan, Mehmet Önder; Uğur, ŞaziyePoly(methyl methacrylate) (PMMA) discs in various molecular weights (M-w) were prepared by free-radical polymerization. Pyrene (Py) was introduced during polymerization as a fluorescence probe. In situ steady state fluorescence experiments were performed to monitor desorption processes in chloroform solvent. When the PMMA discs were in chloroform, desorption of Py molecules were monitored by observing the change of Py fluorescence intensity I-P. To understand the mechanism of desorption, two different experiments were carried out in the meantime. In the first experiment, the weight of swelling and dissolving PMMA discs against dissolution time was monitored. The parallel experiment was conducted by measuring fluorescence intensity I-P from the desorbing Py molecules. Then, a set of desorption experiments were performed by monitoring I-P for various discs with different molecular weight of PMMA. A Fickian diffusion model was employed to quantify the fluorescence data produced from the swelling PMMA discs to measure desorption coefficients D-d. The measured D-d values decrease as the molecular weight of PMMA is increased in the swelling glass.Yayın Reversible film formation from nano-sized PNIPAM particles below glass transition(Springer-Verlag, 2007-01) Uğur, Şaziye; Elaissari, Abdelhamid; Yargı, Önder; Pekcan, Mehmet ÖnderReversible film formation process from nano-sized Poly(N-isopropylacrylamide) (PNIPAM) microgel particles were studied during heating-cooling cycles at various rates. Photon transmission technique was used and transmitted photon intensity I (tr) was monitored during heating-cooling cycles. The increase and decrease in I (tr) during heating and cooling was explained with the void closure and void reconstruction processes, and the corresponding activation energies were measured. It was observed that PNIPAM microgels required less energy during reconstruction of voids than their closure.
