Arama Sonuçları
Listeleniyor 1 - 10 / 55
Yayın On the extraction of the channel allocation information in spectrum pooling systems(IEEE, 2007-04) Öner, Mustafa Mengüç; Jondral, Friedrich K.The spectrum pooling strategy allows a license owner to share a part of his licensed spectrum with a secondary wireless system (the rental system, RS) during its idle times. The coexistence of two mobile systems on the same frequency band poses many new challenges, one of which is the reliable extraction of the channel allocation information (CAI), i.e. the channel occupation of the licensed system (LS). This paper presents a strategy for the extraction of the CAI based on exploiting the distinct cyclostationary characteristics of the LS and RS signals and demonstrates, via simulations, its application on a specific spectrum pooling scenario, where the LS is a GSM network and the RS is an OFDM based WLAN system.Yayın Equilibrium and stability analysis of delayed neural networks under parameter uncertainties(Elsevier Science Inc, 2012-02-15) Faydasıçok, Özlem; Arik, SabriThis paper proposes new results for the existence, uniqueness and global asymptotic stability of the equilibrium point for neural networks with multiple time delays under parameter uncertainties. By using Lyapunov stability theorem and applying homeomorphism mapping theorem, new delay-independent stability criteria are obtained. The obtained results are in terms of network parameters of the neural system only and therefore they can be easily checked. We also present some illustrative numerical examples to demonstrate that our result are new and improve corresponding results derived in the previous literature.Yayın Volumetric ultrasound imaging using 2-D CMUT arrays(IEEE-Inst Electrical Electronics Engineers Inc, 2003-11) Oralkan, Ömer; Ergün, Arif Sanlı; Cheng, Ching-Hsiang; Johnson, Jeremy A.; Karaman, Mustafa; H. Lee, Thomas; Khuri-Yakub, Butrus ThomasRecently, capacitive micromachined ultrasonic transducers (CMUTs) have emerged as a candidate to overcome the difficulties in the realization of 2-D arrays for real-time 3-D imaging. In this paper, we present the first volumetric images obtained using a 2-D CMUT array. We have fabricated a 128 x 128-element 2-D CMUT array with through-wafer via interconnects and a 420-mum element pitch. As an experimental prototype, a 32 x 64-element portion of the 128 X 128-element array was diced and flip-chip bonded onto a glass fanout chip. This chip provides individual leads from a central 16 X 16-element portion of the array to surrounding bondpads. An 8 x 16-element poition of the array was used in the experiments along with a 128-channel data acquisition system. For imaging phantoms, we used a 2.37-mm diameter steel sphere located 10 mm from the array center and two 12-mm-thick Plexiglas plates located 20 mm and 60 mm from the array. A 4 X 4 group of elements in the middle of the 8 X 16-element array was used in transmit, and the remaining elements were used to receive the echo signals. The echo signal obtained from the spherical target presented a frequency spectrum centered at 4.37 MHz with a 100% fractional bandwidth, whereas the frequency spectrum for the echo signal from the parallel plate phantom was centered at 3.44 MHz with a 91% fractional bandwidth. The images were reconstructed by using RF beamforming and synthetic phased array approaches and visualized by surface rendering and multiplanar slicing techniques. The image of the spherical target has been used to approximate the point spread function of the system and is compared with theoretical expectations. This study experimentally demonstrates that 2-D CMUT arrays can be fabricated with high yield using silicon IC-fabrication processes, individual electrical connections can be provided using through-wafer vias, and flip-chip bonding can be used to integrate these dense 2-D arrays with electronic circuits for practical 3-D imaging applications.Yayın Design of optimum nyquist signals based on generalized sampling theory for data communications(IEEE, Piscataway, NJ, United States, 1999-06) Panayırcı, Erdal; Özuğur, Timuçin; Çağlar, HakanA new method is given for the optimal design of bandlimited Nyquist-type signal shapes for data communications, which maximizes its energy in a given time interval. The method is based on the periodically nonuniform sampling (PNS) theory making use of the linear splines. The computation is straightforward, and the constraint for intersymbol interferrence is shown to be easy to include in the problem. A numerical example is given, and performance of the optimal signal shapes is compared with that resulting from the use of previously obtained signal shapes in the literature. It is also concluded that the optimal signal shapes thus obtained are almost immune to small offsets at the sampling instants.Yayın A new method for the source localization in sectionally homogeneous bounded domains involving finitely many inner interfaces of arbitrary shapes(Pergamon-Elsevier Science, 2001-05) İdemen, Mehmet Mithat; Alkumru, AliA new method to localize a static point source buried in a nonhomogeneous bounded domain composed of finitely many homogeneous parts separated by interfaces of arbitrary shapes was established. The source can be a simple point charge or current or a dipole of them. The method requires only the knowledge of the potential function Phi (x, y, z) at five or six points on the outermost interface depending on whether the source is simple or dipole. The new and basic feature of the method consists of determining the potential function Phi (0)(x, y, z) which would be observed if the whole space was filled with a homogeneous material. Then, in the case of a simple source, the position P-0 as well as the strengths can be determined, in general, by solving a system of three linear algebraic equations. When the source consists of a dipole, its position P-0 and moment (p) over right arrow can be found by solving a system of six nonlinear algebraic equations. The determination of Phi (0) P-0 and s (or (p) over right arrow) is achieved iteratively by solving the above-mentioned algebraic equations along with a singular integral equation satisfied by Phi (0) Some illustrative examples show the applicability and accuracy of the method. The method can have effective applications in heat conduction, matter diffusion, electrostatics, steady-state current flow, electroencephalography, electrocardiography, etc.Yayın On the equilibrium of a rigid body suspended by a set of linear springs(John Wiley & Sons, 2000-08) Tokad, YılmazIn this paper an approach is described for determining equilibrium states of a rigid body suspended elastically in space by a set of linear springs. This system is considered as a two-terminal generalized spring with terminal across (translational and rotational velocities, V-G, omega(G)) and terminal through (terminal force and moment, f(G), m(G)) variables. The algorithmic approach used for the solution of six nonlinear and coupled equilibrium equations consists of two major steps. The first step is to assign an initial orientation to the rigid body which is represented by the transformation (rotation) matrix T(theta,n) and reduce the problem to the solution of force equations only through a computer program. This yields the position vector xi of a preselected point G on the rigid body. Although the terminal force f(G) becomes zero at this position, the calculated terminal moment m(G), in general, is not equal to zero. The second step is to try to determine the correct orientation of the rigid body based on an argument that the terminal moment should vanish. The same argument is also used for the solution of force equilibrium equations. These two steps are repeated several times until both f(G) and m(G) vanish simultaneously yielding an equilibrium state (xi,T(theta, n)). Application of the approach is illustrated through various examples. It is observed that, if there are nonstable equilibrium states of the system, then sometimes all possible physical equilibrium states may not be obtained with this approach.Yayın An analysis of stability of a class of neutral-type neural networks with discrete time delays(Hindawi Publishing Corporation, 2013) Orman, Zeynep; Arik, SabriThe problem of existence, uniqueness, and global asymptotic stability is considered for the class of neutral-type neural network model with discrete time delays. By employing a suitable Lyapunov functional and using the homeomorphism mapping theorem, we derive some new delay-independent sufficient conditions for the existence, uniqueness, and global asymptotic stability of the equilibrium point for this class of neutral-type systems. The obtained conditions basically establish some norm and matrix inequalities involving the network parameters of the neural system. The main advantage of the proposed results is that they can be expressed in terms of network parameters only. Some comparative examples are also given to compare our results with the previous corresponding results and demonstrate the effectiveness of the results presented.Yayın Cooperative strategies and achievable rates for two user OFDMA channels(IEEE-INST Electrical Electronics Engineers Inc, 2011-12) Bakım, İsmail Sezi; Kaya, OnurWe propose three encoding strategies for a two user cooperative Orthogonal Frequency Division Multiple Access (OFDMA) system, based on block Markov superposition encoding (BMSE). We obtain the expressions for the resulting achievable rate regions for all three encoding strategies. We show that, by allowing for re-partitioning and re-encoding of the cooperative messages across subchannels, it is possible to better exploit the diversity created by OFDMA, and higher rates can be achieved. We demonstrate potential rate gains attained by cooperative OFDMA, through simulations.Yayın Inductor saturation compensation in three-phase three-wire voltage-source converters via inverse system dynamics(Institute of Electrical and Electronics Engineers Inc., 2022-05-01) Özkan, Ziya; Hava, Ahmet MasumIn three-phase three-wire (3P3W) voltage-source converter (VSC) systems, utilization of filter inductors with deep saturation characteristics is often advantageous due to the improved size, cost, and efficiency. However, with the use of conventional synchronous frame current control methods, the inductor saturation results in significant dynamic performance loss and poor steady-state current waveform quality. This article proposes an inverse dynamic model-based compensation (IDMBC) method to overcome these performance issues. For this purpose, two-phase exact modeling of the 3P3W VSC control system is obtained. Based on the modeling, the inverse system dynamic model of the nonlinear system is obtained and employed such that the nonlinear plant is converted to a virtual linear inductor system for linear current regulators to perform satisfactorily. Further, to control phase currents in the synchronous frame, a two-phase coordinate transformation is proposed. The IDMBC method is tested via dynamic command response and waveform quality simulations and experiments that employ saturable inductors reaching down from full inductance at zero current to 1/9th inductance at full current. The results obtained demonstrate the suitability of the method for 3P3W VSCs employing saturable inductors.Yayın High precision synthesis of a richards immittance via parametric approach(IEEE-INST Electrical Electronics Engineers Inc, 2014-04) Yarman, Bekir Sıddık Binboğa; Köprü, Ramazan; Kumar, Narendra G.; Prakash, ChackoA Richards immitance is a positive real function expressed in terms of the Richards variable lambda = tanh(pT) = Sigma + j Omega where p = sigma + j omega is the classical complex frequency. A Richards immittance can be synthesized as a lossless two port terminated in a resistance as in Darlington's synthesis such that the two- port consists of commensurate transmission lines. In this paper, a high precision method is presented to synthesize a Richards immittance as a lossless two- port constructed with cascade connections of equal length transmission lines, as well as short and open stubs. The new method of synthesis utilizes Bode procedure ( or Parametric Method) to correct an immitance function specified in the complex Richards variable lambda at each step of the synthesis. It is verified that new technique can synthesize a randomly generated Richards immitate function yielding 25 commensurate lines with the accumulated numerical error less than 10(-3.) A complete synthesis package is developed in MatLab and successfully integrated with the Real Frequency Technique to design broadband matching networks. Examples are presented to show the merits of the new Richards synthesis tool.
