5 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 5 / 5
Yayın Temperature effect on drying and swelling of kappa carrageenan gels: A steady state fluorescence study(Wiley-V C H Verlag GMBH, 2008) Tarı İlgin, Özlem; Pekcan, Mehmet ÖnderA novel technique based on in situ steady state fluorescence (SSF) measurements is introduced for studying drying and swelling Of kappa(-) carrageenan (kappa carrageenan) gels at various temperatures. kappa(-) carrageenan gels were completely dried and then swelled in water vapor. Pyranine was embedded in kappa(-) carrageenan and used as a fluorescence probe. Scattered light intensities, I-SC and fluorescence intensities, I were monitored during the drying and swelling Of kappa(-) carrageenan gels. it was observed that the fluorescence intensity decreased linearly as drying time was increased. A simple model consisting of Case II diffusion was used to quantify the drying processes of the kappa(-) carrageenan gels. This moving boundary model provided packing constant, kappa(o). During swelling, fluorescence intensity increased exponentially as time is increased. The increase in I, was modeled using Li-Tanaka equation from which swelling time constants, tau(c) and cooperative diffusion coefficients, D-c were determined. It was observed that swelling time constants, tau(c) decreased and diffusion coefficients, D-c increased as the swelling temperature was increased. Activation energies for drying and swelling were also obtained and found to be 53.9 and 47.2 kJ mol(-1), respectively.Yayın In situ fluorescence study of swelling, sorption and desorption processes in and out of PAAm gels(Wiley-V C H Verlag GMBH, 2008-05) Evingür, Gülşen Akın; Karslı, Kadir; Pekcan, Mehmet ÖnderSmall molecule sorption and desorption in and out of polyacrylamide (PAAm) gels were studied at various temperatures. Pyranine (P(y)) dissolved in water used as a probe. Fluorescence emission intensity, I(p) from P(y) was monitored for studying sorption and desorption processes. Scattered light intensities, I(SC) from PAAm gel was also monitored to observed structural variations during sorption and desorption process. Li-Tanaka model was applied to produce the swelling time constants, tau(C) and sorption coefficients, D(C) for the swelling processes. on the other hand, sorption and desorption processes were studied and coefficients were produced by using Fickian model. Related activation energies were also calculated from the corresponding physical processes.Yayın Thermally assisted OSL from deep traps in Al2O3:C(Pergamon-Elsevier Science Ltd, 2010-03) Polymeris, George S.; Raptis, Spyridoula; Afouxenidis, Dimitrios; Tsirliganis, Nestor C.; Kitis, GeorgeThe present work suggests an alternative experimental method in order to not only measure the signal of the deep traps in Al2O3:C without heating the sample to temperatures greater than 500 degrees C, but also use this signal for high dose level dosimetry purposes as well. This method consists of photo transfer OSL measurements performed at elevated temperatures using the blue LEDs (470 nm, FWHM 20 nm) housed at commercial Riso TL/OSL systems, after the sample was previously heated up to 500 degrees C in order to empty its main TL dosimetric trap. The influence of this procedure on specific features such as glow curve shape and sensitivity of the main TL glow peak was also studied.Yayın Equivalent dose in quartz from young samples using the SAR protocol and the effect of preheat temperature(Pergamon-Elsevier Science Ltd, 2006-09) Güneç Kıyak, Nafiye; Canel, TimurMajor concerns in the dating of samples younger than a few hundred years by the optically stimulated luminescence (OSL) technique are thermal transfer and partial bleaching. Thermal transfer during preheating enhances the OSL signal due to the charge transfer from thermally sensitive, but light-insensitive, traps to optical centres of quartz and results in an overestimate in equivalent dose, especially for very young samples. In this study, the single-aliquot regenerative-dose protocol is used to obtain values of equivalent dose (D-e) from young samples taken from various environments around Istanbul. Within this framework, we aim to investigate the effect of preheat temperature on equivalent dose from 150 to 300 degrees C, the reproducibility of De measurements for young deposits and the contribution from thermal transfer of charge to the equivalent dose estimation. It was observed that the measured dose is influenced significantly by preheat temperature and the increase in the De is clearly due to thermal transfer of charge from deep thermally sensitive traps to OSL trap during preheating of the samples prior to the main OSL measurements.Yayın LM-OSL thermal activation curves of quartz: Relevance to the thermal activation of the 110 degrees C TL glow-peak(Pergamon-Elsevier Science Ltd, 2008-01) Güneç Kıyak, Nafiye; Polymeris, George S.; Kitis, GeorgeThe thermally activated characteristics (TAC) of the linearly modulated optically stimulated luminescence (LM-OSL) signals of seven quartz samples from different origin were studied relative to the TAC of their respective thermoluminescence (TL) glow-peaks at 110 degrees C. Within the framework of the study the TAC behavior of the LM-OSL was investigated by measuring the OSL signal at room temperature (RT) with the 110 degrees C glow-peak present during OSL measurements, as well as, at 125 degrees C without the glow-peak at 110 degrees C removed by a cut-heat at 180 degrees C prior to OSL measurement. The LM-OSL curves were analyzed into individual components using a computerized deconvolution procedure. It was found that all individual LM-OSL components of each kind of quartz follow the TAC behavior of the respective TL glow-peak at 110 degrees C. The fourth component of the LM-OSL curve, centered at about t(m) = 400 s, appeared when the OSL measurements were performed at RT, whereas it was absent when the OSL measurement were performed at 180 degrees C. It is suggested that this component is closely related with the TL glow-peak at 110 degrees C.
