16 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 16
Yayın A new late holocene eolianite record from Altinkum Beach, North Cyprus(Scientific technical research council Turkey-Tubitak, 2012-06) Erginal, Ahmet Evren; Güneç Kıyak, Nafiye; Ertek, Topçu AhmetIn this study, we investigated the main depositional characteristics and obtained Optically Stimulated Luminescence (OSL) ages of coastal eolianite on the north coast of Cyprus, where this occurrence had not previously been recorded. Based on EDX/SEM and XRD data and field observations, the studied eolianite that crops out between elevations of 1 m and 14 m a.s.l. is made up predominantly of quartz grains, most of which consist of medium- to fine-grained sand. The rock comprises aragonite, calcite and quartz with lesser amounts of bornite and hematite as accessory minerals. OSL ages indicated that the initial deposition of eolianite sands took place at 1.51 +/- 0.21 ka years ago.Yayın Investigating the thermally transferred optically stimulated luminescence source trap in fired geological quartz(Pergamon-Elsevier Science Ltd, 2014-03) Koul, Dileep K.; Patil, Pravinkumar G.; Oniya, Ebenezer O.; Polymeris, George S.The pre-dosed thermoluminescence (TL) emission of quartz has been found to be useful in retrospective dosimetry and archaeometry. Though the pre-dosed optically stimulated luminescence (OSL) and emissions have been reported to be similar, the former has been found to be un-reliable for the equivalent dose estimation. As this measurement protocol involves thermal heating at around 400 degrees C, the work reported in this paper investigated the influence of this heating on the OSL using fired specimens from various regions. The results suggested that the discrepancy in the behaviour of two emissions is caused by the presence of the thermally transferred optically stimulated luminescence (TT-OSL) induced by thermal-activation involved in the pre-dose treatment. This transferred signal was observed to be very significant in the case of samples containing a prominent higher-temperature TL peak at similar to 375 degrees C. The characterization of this signal based on (i) the nature of the glow curves, (ii) thermal-annealing of the OSL trap, (iii) observation of the TT-OSL, (iv) bleaching of the source trap and (v) the correlation between TL and OSL seems to suggest that the trap corresponding to this TL peak is the source trap in the TT-OSL emission mechanism.Yayın Component resolved OSL dose response and sensitization of various sedimentary quartz samples(Elsevier Ltd, 2007-02) Güneç Kıyak, Nafiye; Polymeris, George S.; Kitis, GeorgeThe structure of the linearly modulated optically stimulated luminescence (LM-OSL) signal was studied for four sedimentary quartz samples, collected from different sites around Istanbul, Turkey. Applying a computerized deconvolution analysis to the LM-OSL curves, at least six individual components of first-order kinetics were identified and photoionization cross-section of each component was evaluated. The OSL dose-response curve of each component for each quartz sample was obtained, showing a remarkable differentiation from component to component. The behavior of a highly dosed sample to successive LM-OSL measurements was also studied showing a stable recuperation signal in the position of the "slow" and "medium" components and high resistance to OSL bleaching of the "slow" component. The individual sensitivity of each component as a function of the activation temperature was obtained. The sensitivity of each component was normalized over the respective sensitivity of the glow-peak at 110 degrees C of quartz in order to investigate the ability of the 110 degrees C glow-peak to act as a correction factor for all components of the LM-OSL curves examined.Yayın The firing temperature of pottery from ancient Mesopotamia, Turkey, using luminescence methods: a case study for different grain-size fractions(Wiley-Blackwell, 2014-10) Polymeris, George S.; Güneç Kıyak, Nafiye; Koul, Dileep K.; Kitis, GeorgeThe assessment of the firing temperature of a prehistoric pottery sample collected from ancient Mesopotamia, Turkey was studied using luminescence techniques. The methods for this estimation involved the observation of the thermal and pre-dose sensitization with various re-firing temperatures for both TL and the OSL signals. In the former case, the 110 degrees C TL peak and the rest of the glow curve were used as proxies in this study. In the framework of a first attempt to investigate the impact of grain-size dependence on the sensitization of the luminescence signals, the aforementioned study was performed with four different pottery grain-size fractions: (i) less than 60m, (ii) 60-90m, (iii) 90-180m and (iv) 180-250m. The results clearly demonstrated the firing temperature mark of approximate to 500 degrees C in for the grain size of 90-180m, whileas in the case of the lower grain-size fractiona third proxy, the ratio of the pre-dosed to the thermal sensitization, was seen to indicate the firing temperature. The remaining two grain-size fractions failed to provide any meaningful results with regard to the firing temperature estimation. The dependence of the TL characteristics on the grain size was explained in the framework of the mixed mineralogy.Yayın Optical stimulated luminescence dating study of eolianite on the Island of Bozcaada, Turkey: Preliminary results(The Coastal Education and Research Foundation, 2010-07) Güneç Kıyak, Nafiye; Erginal, Ahmet EvrenIn the present paper, eolianite exposed on the south coast of the semiarid island of Bozcaada, Turkey, was investigated on the basis of geomorphologic and petrographic data, and optically stimulated luminescence (OSL) dating results. The eolianite is lithic arenite in composition and contains abundant quartz, calcite, and various lithoclasts amalgamated with micritic calcite, sparitic calcite, and meniscus cements. Within the youngest layers standing at 1-2 m above sea level, the rock contains rhizoliths with or without carbonaceous fills. The OSL ages obtained ranged between 24.21 +/- 1.53 ka and 16.18 +/- 1.70 ka, suggesting that eolianite constitutes an example of low stand deposits coinciding with oxygen isotope stage 2 (OIS-2).Yayın Thermoluminescence as a probe in bioactivity studies; the case of 58S sol-gel bioactive glass(IOP Publishing Ltd, 2011-10-05) Polymeris, George S.; Goudouri, Ourania Menti; Kontonasaki, Eleana; Paraskevopoulos, Konstantinos M.; Tsirliganis, Nestor C.; Kitis, GeorgeThe formation of a carbonated hydroxyapatite (HCAp) layer on the surface of bioactive materials is the main reaction that takes place upon their immersion in physiological fluids. To date, all techniques used for the identification of this HCAp formation are rather time consuming and not well suited to detailed and rapid monitoring of changes in the bioactivity response of the material. The aim of this work is to explore the possibility of using thermoluminescence (TL) for the discrimination between different bioactive responses in the case of the 58S bioactive glass. Results provided strong indications that the 110 degrees C TL peak of quartz can be used effectively in the study of the bioactive behaviour of 58S bioactive glass, since it is unambiguously present in all samples and does not require deconvolution analysis. Furthermore, the intensity of the 110 degrees C TL peak is proven to be very sensitive to the different bioactive responses, identifying the loss of silica which takes place at the first stages of the sequence. The discontinuities of the 110 degrees C TL peak intensity plot versus immersion time at 8 and 1440 min provide experimental indications regarding the timescale for both the beginning of amorphous CaP formation as well as the end of crystalline hydroxyl-apatite formation respectively, while the spike in the sensitization of the 110 degrees C TL peak, which was observed for immersion times ranging between 20 and 40 min, could be an experimental feature indicating the beginning of the crystalline HCAp formation.Yayın Effect of annealing temperature on determining trap depths of quartz by various heating rates method(Pergamon-Elsevier Science, 2001-12) Güneç Kıyak, Nafiye; Buluş, E.The aim of this study is to determine the trap parameters (trap depth E, frequency factors) of quartz using various heating rates method and also to investigate the effect of annealing temperature on determining trap depths. The method is based on the positions of the thermoluminescence peaks, obtained from the change in temperature of the peak at maximum caused by changing the heating rate at which the sample is measured. In the present work, powder quartz samples were annealed first at different temperatures before irradiation. Then samples irradiated to different doses were measured with a TL reader at different heating rates and the glow curves were recorded. In order to calculate the trap depth E and the frequency factor s, the glow parameter T-m was determined experimentally from the glow curve by measuring the shift of the maximum peak temperature depending on heating rate beta. The calculation of trap parameters was repeated for each annealing temperature. Then the effect of annealing temperature on trap depths calculated by the various heating rates method was evaluated.Yayın In-homogeneity in the pre-dose sensitization of the 110 degrees C TL peak in various quartz samples: The influence of annealing(Elsevier Science BV, 2012-03-01) Polymeris, George S.; Oniya, Ebenezer O.; Jibiri, Nnamdi N.; Tsirliganis, Nestor C.; Kitis, GeorgeThe pre-dose sensitization effect of the 110 degrees C TL glow-peak of quartz is a basic tool in thermoluminescence and optically stimulated luminescence dating and retrospective dosimetry. In the present work, a homogeneity study was performed on pre-dose sensitization in grains obtained from large quartz crystals samples collected from 10 different origins. The aliquot - to - aliquot scatter of the pre-dose sensitization of the 110 degrees C TL peak within each quartz crystal was monitored. The influence of the annealing on this scattering was also studied. Therefore, the investigation was applied to the un-fired "as is" samples as well as to samples annealed at 900 degrees C for 1 h following cooling to room temperature in air. The results showed that in the case of "as is" quartz the sensitization effect vary strongly within each aliquot of the same quartz sample. This strong variation is removed by both the high temperature annealing as well as heating up to 500 degrees C, involved in the TL measurements. These results are generally discussed in the framework of existing models and applications of the effect.Yayın Equivalent dose in quartz from young samples using the SAR protocol and the effect of preheat temperature(Pergamon-Elsevier Science Ltd, 2006-09) Güneç Kıyak, Nafiye; Canel, TimurMajor concerns in the dating of samples younger than a few hundred years by the optically stimulated luminescence (OSL) technique are thermal transfer and partial bleaching. Thermal transfer during preheating enhances the OSL signal due to the charge transfer from thermally sensitive, but light-insensitive, traps to optical centres of quartz and results in an overestimate in equivalent dose, especially for very young samples. In this study, the single-aliquot regenerative-dose protocol is used to obtain values of equivalent dose (D-e) from young samples taken from various environments around Istanbul. Within this framework, we aim to investigate the effect of preheat temperature on equivalent dose from 150 to 300 degrees C, the reproducibility of De measurements for young deposits and the contribution from thermal transfer of charge to the equivalent dose estimation. It was observed that the measured dose is influenced significantly by preheat temperature and the increase in the De is clearly due to thermal transfer of charge from deep thermally sensitive traps to OSL trap during preheating of the samples prior to the main OSL measurements.Yayın Age, composition and paleoenvironmental significance of a Late Pleistocene eolianite from the western Black Sea coast of Turkey(Pergamon-Elsevier Science Ltd, 2013-05-16) Erginal, Ahmet Evren; Güneç Kıyak, Nafiye; Ekinci, Yunus Levent; Demirci, Alper; Ertek, Topçu Ahmet; Canel, TimurOn the basis of field observations, thin section interpretations, microanalytical data, electrical resistivity survey and luminescence dating, the age, composition and internal structure of coastal eolianite on the west Black Sea coast at Sile, Istanbul, was studied for a combined interpretation of dune rock development and facies characteristics. Results demonstrate that the eolianite is made up of south-dipping, large-scale dune stratification, consisting mainly of quartz sand and, in particular, abundant ooids, as well as the binding cement which is composed of calcite and aragonite. Based on Electrical Resistivity Tomography (ERT) images, the eolianite has a thickness of between 3.5 m and 8 m and overlies a buried rugged topography that has developed on the Pliocene unit. This suggests the predominance of northerly winds that account for the landward removal of dune sands by offshore wind drift prior to carbonate cementation. Optically Stimulated Luminescence (OSL) dating estimations revealed that the initial deposition of the laminated eolianite layers on the underlying older unit took place at 138.57 +/- 13.65 ka, matching the Karangatian highstand or Marine Isotope Stage (MIS) 5e.
