17 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 17
Yayın Vapor-induced film formation from low-T-g particles for different solvent compositions(Elsevier Inc, 2006-05-15) Arda, Ertan; Kara, Selim; Saraç, Ayfer; Pekcan, Mehmet ÖnderThe photon transmission method was used to study latex film formation from poly(vinyl acetate) (PVAc) particles induced by two different solvents. Films with the same latex content were prepared from PVAc particles and exposed to vapor of ethanol-water and acetone-water mixtures in various compositions. Transmitted photon intensities, I-tr, from these films increased with increasing vapor exposure time. The increase in I-tr is attributed to the increase in crossing density at the polymer-polymer junction. The Prager-Tirrell model was employed to obtain the back-and-forth frequency, v, of the reptating polymer chain during film formation induced by solvent vapor. It was observed that the produced v values increase as the solvent content is increased for both solvents. Abilities of both solvents to form films were interpreted with the solubility parameters of the solvents and the PVAc.Yayın A photon transmission study for film formation from poly(vinyl acetate) latex particles with different molecular weights(John Wiley & Sons Inc, 2007-10-15) Arda, Ertan; Kara, Selim; Pekcan, Mehmet ÖnderThe photon transmission technique was used to monitor the temperature evolution of film formation from poly(vinyl acetate) (PVAc) latex particles with two different molecular weights. Two sets of latex films were prepared below the glass transition temperature (T-g) of PVAc, which are named as low (LM) and high molecular weight (HM) films. These films were annealed at elevated temperatures above the Tg of PVAc for various time intervals. It is observed that transmitted photon intensity (I-tr) from these films increased as the annealing temperature was increased. Onset temperatures (T-H) at given times (tau H) for starting the optical clarity of LM and HM films were measured and used to calculate the healing activation energies (Delta H) for the PVAc minor chains, and found to be as 28.1 kcal/mol and 27.7 kcal/mol, respectively. The increase in the transmitted photon intensity, Itr above TH was attributed to the increase in the number of disappeared interfaces between the deformed latex particles. Prager-Tirrell (PT) model was employed to interpret the increase in the crossing density of chains at the junction surfaces. The interdiffusion (backbone) activation energies (Delta E) were measured and found to be 177.5 kcal/mol and 210.7 kcal/mol for a diffusing PVAc chains across the junction surface of LM and HM latex films, respectively.Yayın Time evolution of film formation from polystyrene particles: a percolation approach(Springer, 2005-12) Uğur, Şaziye; Pekcan, Mehmet ÖnderThis work reports the film formation process from surfactant-free polystyrene (PS) latex particles. Steady state fluorescence and photon transmission techniques were used to study the evolution of film formation. The films were prepared from fluorescein (F)-labeled PS latex particles at room temperature and annealed in 2.5-min-time intervals above the glass transition temperature (T-g) of PS. Fluorescence intensity (I-F) from F was measured after each annealing step to monitor the stages of film formation. Evolution of transparency of latex films was monitored by using the photon transmission intensity, I-tr. Drastic increase in I-tr and I-F above the critical annealing times t(r) and t(c) respectively, were attributed to the percolation behavior of the PS material. Critical exponents, beta, of percolation clusters were measured and found to be around 0.31 and 0.37 for Itr and IF measurement, respectively, which were attributed to the site percolation model.Yayın Film formation from TiO2-polystyrene latex composite: a fluorescence study(Taylor & Francis Group, 2007-03-01) Uğur, Şaziye; Sunay Yapışkan, Münüre Selin; Tepehan, Fatma Zehra; Pekcan, Mehmet ÖnderThis work reports the use of the steady state fluorescence (SSF) technique for studying film formation from TiO2 covered polystyrene (PS) latex particles. The composite films were prepared from pyrene (P)-labeled PS particles by covering them with TiO2 at room temperature and then annealed at elevated temperatures in 10 min time interval above glass transition (T-g) temperature of polystyrene. Five different composite films were studied in various TiO2 layer contents. Fluorescence intensities Ip from P were measured after each annealing step to monitor the stages of film formation. Films showed considerable increase in Ip above the certain onset temperature called minimum film forming temperature, T-0. Void closure and interdiffusion stages were modeled and related activation energies were determined and found to be 23.12 and 92.80 kJ mol(-1), respectively.Yayın Percolation approach to film formation from surfactant-free polystyrene particles(Taylor & Francis, 2005-09) Uğur, Şaziye; Pekcan, Mehmet ÖnderIn this study, a film formation process from surfactant-free polystyrene (PS) latex particles is reported. Steady state fluorescence (SSF) and photon transmission (UVV) techniques were used to study the evolution of film formation. The latex films were prepared from pyrene (P)-labeled PS particles at room temperature and annealed at time intervals of 2.5 min above the glass transition temperature (T-g) of PS. During the annealing processes, the transparency of the film changed considerably. Fluorescence intensity (I-0P) from P was measured after each annealing step to monitor the stages of film formation. Evolution of transparency of latex films were monitored by using photon transmission intensity, I-tr. A drastic increase in I-tr and I-0P above the critical annealing times, t(r) and t(c) were attributed, respectively to percolation behavior of PS material from one side to the other side of the latex film. Critical exponents, beta of percolation clusters were measured and found to be around 0.35 and 0.25 for I-tr and I-0P measurements, respectively.Yayın Monitoring diffusion of reptating polymer chains by a direct energy transfer method: A Monte Carlo simulation(Wiley-Blackwell, 2002-07-29) Tüzel, Erkan; Kısacıkoğlu, Kemal Batuhan; Pekcan, Mehmet ÖnderA kinetic Monte Carlo method was used to simulate the diffusion of reptating polymer chains across an interface. A time-resolved fluorescence technique in conjunction with a direct energy transfer method was used to measure the extent of diffusion of dye-labeled reptating polymer chains. The diffusion of donor- and acceptor-labeled polymer chains between adjacent compartments was randomly generated. The fluorescence decay profiles of donor molecules were simulated at several diffusion steps to produce mixing of the polymer chains. Mixing ratios of donor- and acceptor-labeled polymer chains in compartments were measured at various stages (snap-shots) of diffusion. It was observed that for a given molecular weight, the average interpenetration contour length was found to be proportional to the mixing ratio. Monte Carlo analysis showed that the curvilinear diffusion coefficient is inversely proportional to the weight of polymer chains during diffusion.Yayın Poly (styrene) latex/modified na-activated bentonite nanocomposite films: a fluorescence study(Elsevier Science BV, 2008-12) Uğur, Şaziye; Yargı, Önder; Günister, Ebru; Pekcan, Mehmet ÖnderWe studied film formation of composites of surfactant-free polystyrene (PS) nanoparticles and modified Na-activated bentonite (MLB), by steady state fluorescence (SSF) technique. The films were prepared from a mixture of pyrene (P)-labeled PS particles and MLB at various compositions at room temperature. These films were annealed at elevated temperatures above the glass transition (T(g)) temperature of polystyrene for 10 min. Scattered light (I(S)) and fluorescence intensities (I(P)) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of the composite films was monitored by using photon transmission intensity, I(tr) Atomic force microscopy (AFM) was used to detect the variation in physical structure of annealed composite films. The nanocomposite films exhibited a percolation threshold at 20 wt.% MLB content. Below this fraction two distinct film formation stages were observed which are known as void closure and interdiffusion and above this fraction no film formation was detected. At 0-20 wt.% MLB, minimum film formation, T(0), void closure, T(v) and healing, T(h) temperatures were determined. Void closure and interdiffusion stages were modeled and related activation energies were determined. Void closure activation energies decreased as the percent of MLB increased, no variation was observed in backbone activation energies.Yayın Films formed from polystyrene latex/clay composites: A fluorescence study(Springer New York, 2005-07) Uğur, Şaziye; Alemdar, Ayşe; Pekcan, Mehmet ÖnderThis study reports a steady-state fluorescence (SSF) technique for studying film formation from surractant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (T-g) of polystyrene. During the annealing processes, the transparency of the fllm improved considerably. Scattered light (I-s) and fluorescence intensity (I-s) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I-tr Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite-films. Minimum flIm formation temperature, T-o, and healing temperatures, T-h, were determined. Void closure and interdiff-usion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.Yayın Fluorescence study on Al2O3-polystyrene latex composite film formation(John Wiley & Sons Inc, 2005-06) Uğur, Şaziye; Salman, Oğuz Umut; Tepehan, Galip Gültekin; Tepehan, Fatma Zehra; Pekcan, Mehmet ÖnderThis work reports a steady state fluorescence (SSF) technique for studying film formation from mixture of Al2O3 and polystyrene (PS) latex particles. The composite films were prepared from dispersion of pyrene (P)labeled PS particles in Al2O3 solution at room temperature and annealed at elevated temperatures in 10-min time interval above glass transition (T-g) temperature of polystyrene. Nine different composites film were studied in various latex contents. Fluorescence intensities (I-P) from P were measured after each annealing step to monitor the stages of film formation. No variations in I-p were detected for the films prepared with higher than 33 wt% Al2O3 content. However films prepared below 33 wt% Al2O3 content show considerable increase in I-P above the certain onset temperature called minimum film forming temperature, To. Healing temperatures T., were determined from the maxima of I-P. Void closure and interdiffusion stages were modeled and related activation energies were determined and found to be 20 and 97 kJ.mol(-1), respectively.Yayın Film formation from nano-sized polystrene latex covered with various TiO2 layers(Wiley, 2006-12) Uğur, Şaziye; Sunay, Selin; Elaissari, Abdelhamid; Tepehan, Fatma Zehra; Pekcan, Mehmet ÖnderSteady-state fluorescence technique was used for studying film formation from TiO2 covered nano-sized polystyrene latex particles. The composite films were prepared from pyrene (P)-labeled PS particles by covering them with various layers of TiO2 at room temperature. These films then annealed at elevated temperatures in 10 min time interval above glass transition (T-g) temperature of polystyrene. Five different composite films were studied in various TiO2 layer contents. Fluorescence emission intensity, I-P from P was measured after each annealing step to monitor the stages of film formation. Films present significant increase in I-P above the certain onset temperature called minimum film forming temperature, To. However, at higher annealing temperatures, I-P showed a decrease. Increase and decrease in I-P were modeled by void closure and interdiffusion processes and related activation energies were determined, respectively. Dissolution of annealed PS film, with high TiO2 content presented a nice, ordered nanosized ceramic structure, which may predict the construction of nano-layer photonic crystals.
