4 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 4 / 4
Yayın An automatic calibration procedure of driving behaviour parameters in the presence of high bus volume(Faculty of Transport and Traffic Engineering, 2019-11) Dadashzadeh, Nima; Ergün, Murat; Kesten, Ali Sercan; Zura, MarijanMost of the microscopic traffic simulation programs used today incorporate car-following and lane-change models to simulate driving behaviour across a given area. The main goal of this study has been to develop an automatic calibration process for the parameters of driving behaviour models using metaheuristic algorithms. Genetic Algorithm (GA), Particle Swarm Optimization (PSO), and a combination of GA and PSO (i.e. hybrid GAPSO and hybrid PSOGA) were used during the optimization stage. In order to verify our proposed methodology, a suitable study area with high bus volume on-ramp from the 0-1 Highway in Istanbul has been modelled in VISSIM. Traffic data have been gathered through detectors. The calibration procedure has been coded using MATLAB and implemented via the VISSIM-MATLAB COM interface. Using the proposed methodology, the results of the calibrated model showed that hybrid GAPSO and hybrid PSOGA techniques outperformed the GA-only and PSO-only techniques during the calibration process. Thus, both are recommended for use in the calibration of microsimulation traffic models, rather than GA-only and PSO-only techniques.Yayın Compression of ECG signals using variable-length classified vector sets and wavelet transforms(Springer International Publishing AG, 2012) Gürkan, HakanIn this article, an improved and more efficient algorithm for the compression of the electrocardiogram (ECG) signals is presented, which combines the processes of modeling ECG signal by variable-length classified signature and envelope vector sets (VL-CSEVS), and residual error coding via wavelet transform. In particular, we form the VL-CSEVS derived from the ECG signals, which exploits the relationship between energy variation and clinical information. The VL-CSEVS are unique patterns generated from many of thousands of ECG segments of two different lengths obtained by the energy based segmentation method, then they are presented to both the transmitter and the receiver used in our proposed compression system. The proposed algorithm is tested on the MIT-BIH Arrhythmia Database and MIT-BIH Compression Test Database and its performance is evaluated by using some evaluation metrics such as the percentage root-mean-square difference (PRD), modified PRD (MPRD), maximum error, and clinical evaluation. Our experimental results imply that our proposed algorithm achieves high compression ratios with low level reconstruction error while preserving the diagnostic information in the reconstructed ECG signal, which has been supported by the clinical tests that we have carried out.Yayın Modeling of electrocardiogram signals using predefined signature and envelope vector sets(Hindawi Publishing Corporation, 2007) Gürkan, Hakan; Güz, Ümit; Yarman, Bekir Sıddık BinboğaA novel method is proposed to model ECG signals by means of "predefined signature and envelope vector sets (PSEVS)." On a frame basis, an ECG signal is reconstructed by multiplying three model parameters, namely, predefined signature vector (PSV)(R)," "predefined envelope vector (PEV)(K)," and frame-scaling coefficient (FSC). All the PSVs and PEVs are labeled and stored in their respective sets to describe the signal in the reconstruction process. In this case, an ECG signal frame is modeled by means of the members of these sets labeled with indices R and K and the frame-scaling coefficient, in the least mean square sense. The proposed method is assessed through the use of percentage root-mean-square difference (PRD) and visual inspection measures. Assessment results reveal that the proposed method provides significant data compression ratio (CR) with low-level PRD values while preserving diagnostic information. This fact significantly reduces the bandwidth of communication in telediagnosis operations. Copyright (c) 2007 Hakan Gurkan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Yayın A multi-frequency iterative method for reconstruction of rough surfaces separating two penetrable media(Institute of Electrical and Electronics Engineers Inc., 2024-12-18) Sefer, Ahmet; Yapar, Ali; Bağcı, HakanA numerical scheme that uses multi-frequency Newton iterations to reconstruct a rough surface profile between two dielectric media is proposed. At each frequency sample, the scheme employs Newton iterations to solve the nonlinear inverse scattering problem. At every iteration, the Newton step is computed by solving a linear system that involves the Frechet derivative of the integral operator, which represents the scattered fields, and the difference between these fields and the measurements. This linear system is regularized using the Tikhonov method. The multi-frequency data is accounted for in a recursive manner. More specifically, the profile reconstructed at a given frequency is used as an initial guess for the iterations at the next frequency. The effectiveness of the proposed method is validated through numerical examples, which demonstrate its ability to accurately reconstruct surface profiles even in the presence of measurement noise. The results also show the superiority of the multi-frequency approach over single-frequency reconstructions, particularly in terms of handling surfaces with sharp variations.
