10 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 10
Yayın Time evolution of film formation from polystyrene particles: a percolation approach(Springer, 2005-12) Uğur, Şaziye; Pekcan, Mehmet ÖnderThis work reports the film formation process from surfactant-free polystyrene (PS) latex particles. Steady state fluorescence and photon transmission techniques were used to study the evolution of film formation. The films were prepared from fluorescein (F)-labeled PS latex particles at room temperature and annealed in 2.5-min-time intervals above the glass transition temperature (T-g) of PS. Fluorescence intensity (I-F) from F was measured after each annealing step to monitor the stages of film formation. Evolution of transparency of latex films was monitored by using the photon transmission intensity, I-tr. Drastic increase in I-tr and I-F above the critical annealing times t(r) and t(c) respectively, were attributed to the percolation behavior of the PS material. Critical exponents, beta, of percolation clusters were measured and found to be around 0.31 and 0.37 for Itr and IF measurement, respectively, which were attributed to the site percolation model.Yayın Monovalent and divalent cation effects on phase transitions of iota-carrageenan(Sage Publications Ltd, 2007-01) Kara, Selim; Arda, Ertan; Pekcan, Mehmet ÖnderPhase transitions Of L-carrageenan in a variety of monovalent (Li, Na, K) and divalent (Mg, Ca, Sr) cation solutions were studied during heating and cooling by using photon transmission technique. Photon transmission intensity (I-tr) was monitored against temperature to determine the transition temperatures and activation energies during the heating and cooling processes in the monovalent and divalent systems. Three distinct transition regions were observed during the heating and cooling cycles for the carrageenan-divalent salt system. At the first step of the heating process, dimer groups were transformed into dimers that presented (g-d) transitions, then these dimers were directly converted into a double helix by undergoing a (d-h) transition. In the higher temperature region, a double helix-to-coil (h-c) transition took place. During the cooling process, these transitions are arranged in the order of (c-h), (h-d), and (d-g). The carrageenan-monovalent salt system presented only coil-to-rod-like helix (c-r) and rod-like helix-to-coil (r-c) transitions during the cooling and heating processes, respectively. A hysteresis was observed between (r-c)-(c-r) and (g-d)-(d-g) transitions for the monovalent and divalent cations, respectively.Yayın Film formation from TiO2-polystyrene latex composite: a fluorescence study(Taylor & Francis Group, 2007-03-01) Uğur, Şaziye; Sunay Yapışkan, Münüre Selin; Tepehan, Fatma Zehra; Pekcan, Mehmet ÖnderThis work reports the use of the steady state fluorescence (SSF) technique for studying film formation from TiO2 covered polystyrene (PS) latex particles. The composite films were prepared from pyrene (P)-labeled PS particles by covering them with TiO2 at room temperature and then annealed at elevated temperatures in 10 min time interval above glass transition (T-g) temperature of polystyrene. Five different composite films were studied in various TiO2 layer contents. Fluorescence intensities Ip from P were measured after each annealing step to monitor the stages of film formation. Films showed considerable increase in Ip above the certain onset temperature called minimum film forming temperature, T-0. Void closure and interdiffusion stages were modeled and related activation energies were determined and found to be 23.12 and 92.80 kJ mol(-1), respectively.Yayın Percolation approach to film formation from surfactant-free polystyrene particles(Taylor & Francis, 2005-09) Uğur, Şaziye; Pekcan, Mehmet ÖnderIn this study, a film formation process from surfactant-free polystyrene (PS) latex particles is reported. Steady state fluorescence (SSF) and photon transmission (UVV) techniques were used to study the evolution of film formation. The latex films were prepared from pyrene (P)-labeled PS particles at room temperature and annealed at time intervals of 2.5 min above the glass transition temperature (T-g) of PS. During the annealing processes, the transparency of the film changed considerably. Fluorescence intensity (I-0P) from P was measured after each annealing step to monitor the stages of film formation. Evolution of transparency of latex films were monitored by using photon transmission intensity, I-tr. A drastic increase in I-tr and I-0P above the critical annealing times, t(r) and t(c) were attributed, respectively to percolation behavior of PS material from one side to the other side of the latex film. Critical exponents, beta of percolation clusters were measured and found to be around 0.35 and 0.25 for I-tr and I-0P measurements, respectively.Yayın Films formed from polystyrene latex/clay composites: A fluorescence study(Springer New York, 2005-07) Uğur, Şaziye; Alemdar, Ayşe; Pekcan, Mehmet ÖnderThis study reports a steady-state fluorescence (SSF) technique for studying film formation from surractant-free polystyrene (PS) latex and Na-montmorillonite (SNaM) composites. The composite films were prepared from pyrene (P)-labeled PS particles and SNaM clay at room temperature and annealed at elevated temperatures in 10-min intervals above glass transition temperature (T-g) of polystyrene. During the annealing processes, the transparency of the fllm improved considerably. Scattered light (I-s) and fluorescence intensity (I-s) from P were measured after each annealing step to monitor the stages of film formation. Evolution of transparency of composite films was monitored by using photon transmission intensity, I-tr Scanning electron microscopy (SEM) was used to detect the variation in physical structure of annealed composite-films. Minimum flIm formation temperature, T-o, and healing temperatures, T-h, were determined. Void closure and interdiff-usion stages were modeled and related activation energies were determined. It was observed that both activation energies increased as the percent of SNaM was increased in composite films.Yayın Molecular recognition during sol-gel and gel-sol transition of kappa-iota carrageenan mixtures(Taylor & Francis ltd, 2005-12) Kara, Selim; Arda, Ertan; Pekcan, Mehmet ÖnderSol-gel and gel-sol phase transitions of kappa-iota (kappa-iota) carrageenan mixtures in two types of salts were studied using photon transmission technique. Here, KCl and CaCl2 were chosen as the proper salts for the carrageenan mixtures. Coil-to-double helix (c-h) and double helix-to-dimer (h-d) phase transitions of carrageenan mixtures in monovalent and bivalent cation solutions were studied upon heating and cooling by using photon transmission technique. Photon transmission intensity, It, was monitored against temperature to determine the (c-h) and (h-d) transition temperatures (T-ch and T-nd). Two distinct transition regions were observed in both heating and cooling of the carrageenan-bivatent CaCl2 salt system. At the first step of heating process dimers decompose into double helices by making (d-h) transition. At the high temperature region (h-c) transition takes place. Carrageenan-monovalent KCl salt system presented only (c-h) and (h-c) transitions upon cooling and heating processes. Transition temperatures at the heating and cooling processes were obtained. A hysteresis was observed between (h-c)-(c-h) and (d-h)-(h-d) transitions for the monovalent and bivalent cations respectively.Yayın Film formation from PS latex doped PNIPAM hydrogels at various heating and cooling rates(VSP BV, Brill Academic Publishers, 2008-05-01) Uğur, Şaziye; Yargı, Önder; Pekcan, Mehmet ÖnderFilm formation from polystrene (PS) latex doped poly(N-isopropylacrylamide) (PNIPAM) hydrogels was studied by using photon transmission technique. The transmitted light intensity, It, was monitored during film formation process. Films were prepared by annealing, 10 wt% PS doped PNIPAM particles at five different heating and cooling rates at temperatures ranging from 10 to 100 degrees C. I-tr presented a hysteresis loops during heating-cooling cycles, which were explained by void closure and void reconstruction processes. The corresponding activation energies were measured during reversible film formation process. Void closure and void reconstruction models were introduced to produce the activation energies.Yayın Film formation stages for poly(vinyl acetate) latex particles: a photon transmission study(Springer-Verlag, 2006-07) Kara, Selim; Pekcan, Mehmet Önder; Saraç, Ayfer; Arda, ErtanPhoton transmission technique was used to monitor the evolution of transparency during film formation from poly(vinyl acetate) (PVAc) latex particles. The latex films were prepared below the glass transition temperature (T-g) of PVAc. These films were annealed at elevated temperatures in various time intervals above the T-g of PVAc. It is observed that transmitted photon intensity (I-tr) from these films increased as the annealing temperature is increased. It is seen from I (tr) curves that there are two film formation stages. These successive stages are named void closure (viscous flow) and interdiffusion. The activation energies for viscous flow (Delta H) and backbone motion (Delta E (b)) were obtained by using well-defined models. The averaged values of the backbone (Delta E (b)) and the viscous flow activation energies (Delta H) were found to be 188.6 and 5.6 kcal/mol, respectively. The minimum film formation (tau (M),T (M)) and healing points (tau (H),T (H)) were determined. Minimum film formation (Delta E (M)) and healing activation energies (Delta E (H)) were measured using these time-temperature pairs. Delta E (M) and Delta E (H) were found to be 32.5 and 28.3 kcal/mol, respectively.Yayın Reversible film formation from nano-sized PNIPAM particles below glass transition(Springer-Verlag, 2007-01) Uğur, Şaziye; Elaissari, Abdelhamid; Yargı, Önder; Pekcan, Mehmet ÖnderReversible film formation process from nano-sized Poly(N-isopropylacrylamide) (PNIPAM) microgel particles were studied during heating-cooling cycles at various rates. Photon transmission technique was used and transmitted photon intensity I (tr) was monitored during heating-cooling cycles. The increase and decrease in I (tr) during heating and cooling was explained with the void closure and void reconstruction processes, and the corresponding activation energies were measured. It was observed that PNIPAM microgels required less energy during reconstruction of voids than their closure.Yayın Effect of annealing rate on film formation from poly(vinyl acetate) latex particles(Taylor & Francis Ltd, 2008) Arda, Ertan; Kara, Selim; Pekcan, Mehmet ÖnderThe photon transmission technique was used to monitor the time and temperature evolution of film formation from poly(vinyl acetate) (PVAc) latex particles. The latex films were prepared below the glass transition temperature (T-g) of PVAc. These films were annealed at various annealing rates above the Tg of PVAc. It was observed that transmitted photon intensity (I-tr) from these films increased at all annealing rates as the annealing time and temperature are increased. The increase in the I-tr is attributed to the increase in crossing density at the junction surface. The healing points (tau(H), T-H) were determined for various annealing rates and the healing activation energy (Delta H) was measured and found to be 43.4 kcal/mol. The interdiffusion (backbone) activation energies (Delta E) and reptation frequencies (nu) of PVAc chains were measured. The averaged value of Delta E was found to be 226.6 kcal/mol. It is observed that Delta E is unchanged but nu is increased as increasing the annealing rates.
