12 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 12
Yayın Optimal deployment in randomly deployed heterogeneous WSNs: A connected coverage approach(Academic Press Ltd- Elsevier Science Ltd, 2014-11) Sevgi, Cüneyt; Koçyiğit, AltanWireless sensor networks (WSNs) are resource-scarce networks and the optimization of the resources is challenging. As far as random deployment is concerned, the optimization of these resources becomes even more difficult In this paper, a novel framework is proposed for solving optimal deployment problems for randomly deployed and clustered WSNs. In several existing approaches to solve these problems, either only partial-coverage is considered or only connectivity is analyzed when full-coverage is assured. Through this study, we aim to contribute to the better understanding of partial connected coverage. For this purpose, we introduce cluster size formulations which provide network designers with estimating partial-coverage easily. While the proposed framework facilitates our cluster size formulations for coverage estimations, it also adopts the percolation theory to analyze the degree of connectivity when the targeted degree of partial-coverage is achieved. As the partial connected coverage approach reflects real-life deployment scenarios, the use of percolation theory results in generic solutions of optimal deployment problems, which indeed makes the solution independent from any routing algorithms. Moreover, a practical optimal deployment problem is formulated to find the cheapest WSN application that satisfies the targeted degree of partial connected coverage. Further, in this paper, the cost effectiveness of the node heterogeneity is investigated through comparing the heterogeneous WSNs with their homogeneous counterparts.Yayın Investigating the thermally transferred optically stimulated luminescence source trap in fired geological quartz(Pergamon-Elsevier Science Ltd, 2014-03) Koul, Dileep K.; Patil, Pravinkumar G.; Oniya, Ebenezer O.; Polymeris, George S.The pre-dosed thermoluminescence (TL) emission of quartz has been found to be useful in retrospective dosimetry and archaeometry. Though the pre-dosed optically stimulated luminescence (OSL) and emissions have been reported to be similar, the former has been found to be un-reliable for the equivalent dose estimation. As this measurement protocol involves thermal heating at around 400 degrees C, the work reported in this paper investigated the influence of this heating on the OSL using fired specimens from various regions. The results suggested that the discrepancy in the behaviour of two emissions is caused by the presence of the thermally transferred optically stimulated luminescence (TT-OSL) induced by thermal-activation involved in the pre-dose treatment. This transferred signal was observed to be very significant in the case of samples containing a prominent higher-temperature TL peak at similar to 375 degrees C. The characterization of this signal based on (i) the nature of the glow curves, (ii) thermal-annealing of the OSL trap, (iii) observation of the TT-OSL, (iv) bleaching of the source trap and (v) the correlation between TL and OSL seems to suggest that the trap corresponding to this TL peak is the source trap in the TT-OSL emission mechanism.Yayın The correlation of fast OSL component with the TL peak at 325 degrees C in quartz of various origins(Elsevier Science BV, 2010-02) Kitis, George; Güneç Kıyak, Nafiye; Polymeris, George S.; Tsirliganis, Nestor C.The fast component of the optically stimulated luminescence (OSL) signal in quartz is the basic tool for the optical dating. Its relation with the thermoluminescence (TL) glow-peak at about 325 degrees C is well established for naturally irradiated quartz. This relationship is also an important part of a general model for quartz on which many theoretical simulations of various OSL experimental results have been based. In the present work this relationship is systematically investigated in nine quartz samples of different origin. The linearly modulated OSL (LM-OSL) curves of all quartz samples for stimulation time less than 50s consists of two components discriminated easily by a computerized curve deconvolution (CCD) analysis. By comparing the un-bleached to the respective bleached TL glow-curve, it is found that the system of these two fast OSL components is directly related with only a small portion of the electron traps responsible for the TL glow-peaks in the temperature region 200-400 degrees C. By increasing the stimulation times, besides the two fast components, the medium and the slow components are also obtained. The medium and slow components are clearly related with the main body of the electron traps responsible for TL glow-peaks in the same temperature region 200-400 degrees C. Despite their different origin all quartz samples show an appreciable homogeneity concerning the number and time position of the individual components, whereas, the relative TL/OSL intensities vary strongly from sample to sample with the integrated TL intensity being generally much less than the integrated OSL intensity.Yayın Component resolved OSL dose response and sensitization of various sedimentary quartz samples(Elsevier Ltd, 2007-02) Güneç Kıyak, Nafiye; Polymeris, George S.; Kitis, GeorgeThe structure of the linearly modulated optically stimulated luminescence (LM-OSL) signal was studied for four sedimentary quartz samples, collected from different sites around Istanbul, Turkey. Applying a computerized deconvolution analysis to the LM-OSL curves, at least six individual components of first-order kinetics were identified and photoionization cross-section of each component was evaluated. The OSL dose-response curve of each component for each quartz sample was obtained, showing a remarkable differentiation from component to component. The behavior of a highly dosed sample to successive LM-OSL measurements was also studied showing a stable recuperation signal in the position of the "slow" and "medium" components and high resistance to OSL bleaching of the "slow" component. The individual sensitivity of each component as a function of the activation temperature was obtained. The sensitivity of each component was normalized over the respective sensitivity of the glow-peak at 110 degrees C of quartz in order to investigate the ability of the 110 degrees C glow-peak to act as a correction factor for all components of the LM-OSL curves examined.Yayın Optical stimulated luminescence dating study of eolianite on the Island of Bozcaada, Turkey: Preliminary results(The Coastal Education and Research Foundation, 2010-07) Güneç Kıyak, Nafiye; Erginal, Ahmet EvrenIn the present paper, eolianite exposed on the south coast of the semiarid island of Bozcaada, Turkey, was investigated on the basis of geomorphologic and petrographic data, and optically stimulated luminescence (OSL) dating results. The eolianite is lithic arenite in composition and contains abundant quartz, calcite, and various lithoclasts amalgamated with micritic calcite, sparitic calcite, and meniscus cements. Within the youngest layers standing at 1-2 m above sea level, the rock contains rhizoliths with or without carbonaceous fills. The OSL ages obtained ranged between 24.21 +/- 1.53 ka and 16.18 +/- 1.70 ka, suggesting that eolianite constitutes an example of low stand deposits coinciding with oxygen isotope stage 2 (OIS-2).Yayın New quartz technique for OSL dating of limestones(2010) Liritzis, Ioannis; Drivaliari, N.; Polymeris, George S.; Katagas, Christos G.The equivalent dose De determination of limestone-made ancient constructions by thermoluminescence (TL) prevents accurate measurements and requires plateau test of bleached curves. Optical stimulated luminescence (OSL) of quartz and feldspar minerals for surface dating is routinely applied for De but not for limestones. Here the OSL of present traces of such minerals removed with powder from surface limestone bleached by sunlight overcomes this issue and offers an alternative way for De. This is verified with further test examples.Yayın The survey on Near Field Communication(MDPI, 2015-06) Coşkun, Vedat; Özdenizci Köse, Büşra; Ok, KeremNear Field Communication (NFC) is an emerging short-range wireless communication technology that offers great and varied promise in services such as payment, ticketing, gaming, crowd sourcing, voting, navigation, and many others. NFC technology enables the integration of services from a wide range of applications into one single smartphone. NFC technology has emerged recently, and consequently not much academic data are available yet, although the number of academic research studies carried out in the past two years has already surpassed the total number of the prior works combined. This paper presents the concept of NFC technology in a holistic approach from different perspectives, including hardware improvement and optimization, communication essentials and standards, applications, secure elements, privacy and security, usability analysis, and ecosystem and business issues. Further research opportunities in terms of the academic and business points of view are also explored and discussed at the end of each section. This comprehensive survey will be a valuable guide for researchers and academicians, as well as for business in the NFC technology and ecosystem.Yayın Luminescence ages of feldspar contaminated quartz from fluvial terrace sediments(Wind-J Wojewoda Publ Co, 2008-01-01) Güneç Kıyak, Nafiye; Erturaç, Mehmet KorhanThis study focuses on obtaining luminescence ages in feldspar contaminated quartz from well-developed fluvial terraces of the Yesilirmak (Iris) river located inside the eastern North Anatolian Fault Shear Zone (NAFZ). We applied a technique based on conventional single-aliquot regenerative-dose (SAR) protocol, modified with an IR pre-treatment to reduce the OSL contribution from feldspar for accurately measuring the dose in quartz. All investigated samples showed an ability to measure a beta dose given in the laboratory, a so called dose recovery test. The dependence of the equivalent dose on thermal treatment was also examined. Dose rate calculations were based on spectral analysis of gamma measurements by a field spectrometer on site. The efforts to establish a chronology using the IR modified SAR technique produced reliable dose results in stratigraphic order. Results were reproducible and grouped broadly between 35-109 ka for Bektemur, 32-36 ka for Kizilca, 19-47 ka for Aksalur and 35-44 ka for Sahinkaya. Obtained results show that the studied area was controlled by tectonic activities within the last 50 ka and the sample Aksalur 2 was the loess deposit formed by aeolian activity.Yayın Investigation of the OSL signal from very deep traps in natural quartz(Univ Agean, Dept Mediterranean Stud, 2010) Kitis, George; Güneç Kıyak, Nafiye; Polymeris, George S.; Pagonis, VasilisIt has been recently reported by several studies that a thermally transferred optically stimulated luminescence (TT-OSL) signal from quartz grains can be used to extend the dating range for quartz samples. The TT-OSL signals are believed to consist of a recuperated OSL (ReOSL) component and a basic-transferred OSL (BT-OSL) component. In the present work the TT-OSL signals from several types of unfired quartz samples were studied. A special protocol was used, which allowed the measure the OSL from very deep traps (VDT) as a function of the OSL stimulation temperature. It was found that all quartz samples exhibit TT-OSL signals, which are depended on sample and on the OSL stimulation temperature. The activation energy of the process was evaluated and the influences of the TT-OSL on the ReOSL dating protocol are discussed.Yayın Component-resolved thermal stability and recuperation study of the LM-OSL curves of four sedimentary quartz samples(Elsevier Ltd, 2007-09) Kitis, George; Polymeris, George S.; Güneç Kıyak, NafiyeThermal stability as well as recuperation stands among the crucial general characteristics of different OSL components in quartz. Through a series of thermal stability and recuperation experiments, in conjunction with curve fitting studies, a component resolved analysis is carried out, studying these two aspects for the OSL components identified ill quartz samples collected from sites around Istanbul. A thermally unstable ultra-fast component is reported, which is almost totally removed by heating up to 250-280 degrees C. Most slow and medium components show a stability temperature region between 200 and 350 degrees C, whereas the thermal stability of the final slow component is limited Lip to almost 300 degrees C. No detectable recuperation occurs for the first five components reported. The greatest recuperation occurred in the sixth component, despite the fact that it was less than 1%.
