9 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 9 / 9
Yayın Theoretical calculation of the kinetic coefficient of normal crystal growth(Trans Tech Publications Ltd, 2004) Dimitrov, Ventzislav IvanovAn expression for the velocity u of migration of a diffuse simple crystal-melt interface has been derived on the basis of the theory of atomic mobility in supercooled liquids: u = K-0 (T / T-m) DeltaT, where DeltaT = T-m - T the undercooling below the melting point T-m; K-0 is the kinetic coefficient of atomic attachment, which is used in models of crystal growth. It has been calculated for a number of metals. u(max) = K0Tm / 4 is the theoretical limit of the velocity of crystal growth. For a number of FCC metals the theoretical limit of crystal growth has been found to be of order of 200 m/s. The crystal growth kinetics has been shown to be limited by the atomic self-diffusion in the interface, for which the strong dependence on the orientation of the crystal/melt interface has been explained.Yayın A priority based packet scheduler with deadline considerations(IEEE Computer Soc, 2006) Dağ, Tamer; Gökgöl, OralQoS issues have become a focal point of research on Next Generation Networks (NGNs). In order to supply the various QoS requirement for different kinds of applications, new scheduling policies need to be developed and evaluated. This paper introduces a new kind of packet scheduler which tries to integrate an important QoS parameter (the delay) with the classical schedulers. The two sets of algorithms introduced; Static Priority with Deadline Considerations (SPD) and Dynamic Priority with Deadline Considerations (DPD); not only simplify the complexity and overhead of a classical Earliest Deadline First (EDF) or Static Priority (SP) algorithm, but also provide a better QoS based on the results of the simulations conducted.Yayın Representation of speech signals by single signature base function within optimum frame length(IEEE, 2000) Akdeniz, Rafet; Yarman, Bekir Sıddık BinboğaBefore this study, we proposed a novel method to represent signals in terms of, so called, “Signature Base Functions-SBF" which were extracted from the physical features of the waveform under consideration. SBF were determined in ad-hoc manner, which requires tedious search process, and they were not orthogonal. Furthermore, optimality of SBF was in question. In this work however, we suggest a well-organized procedure to generate “Optimum Orthogonal Signature Base Functions-OSBF" for selected waveforms, which in turn provides excellent means for signal representations. It is shown that the new method of signal representation, which is based on OSBF, requires less computation time with substantial signal compression and results in efficient speaker dependent recognition.Yayın Hızlı sönümlemeli kanallarda yeni bir uzay-zaman-frekans kodlamalı OFDM sistem tasarımı(IEEE, 2004) Oğuz, Onur; Aygölü, Hasan Ümit; Panayırcı, ErdalBu çalışmada, frekans seçici hızlı sönümlemeli kanallarda telsiz iletişim için bir uzay-zaman-frekans çeşitlemesi yöntemi önerilmiştir. Önerilen yöntem, OFDM tekniğini kullanarak frekans seçici kanalı uygun hale getirdikten sonra sırasıyla dik uzay-frekans ve dik uzay-zaman blok kodlama uygulayarak uzay-zaman-frekans çeşitlemesi sağlamaktadır. Elde edilen sistemin başarımını arttırmak üzere sisteme uygun bu kafes kodlama tekniği araştırılmış ve uygun kafes yapısının oluşturulması için yeni kriterler ortaya çıkarılmıştır. Oluşan sistemin başarımını, bilgisayar benzetimleriyle incelenmiş ve var olan yöntemlerle karşılaştırılmıştır.Yayın Analysis of self noise in a clock recovery systems with a high-order nonlinearity(IEEE, 1998) Panayırcı, ErdalThis paper presents a new technique to compute efficiently the I and Q spectra, and the I - Q cross-spectrum of the self noise appearing at the output of the zero-memory, high order nonlinear device employed in a clock recovery system. It is known that these spectra play an important role in the phase jitter performance of the clock regenerator. The results are very general and applicable to many cases of practical interest. A numerical example provided at the end of the paper shows that the new approach yields very accurate results and is much faster that the usual computer simulation method.Yayın Circuit model for given reflectance data constructed with mixed lumped and distributed elements for high speed/high frequency communication systems(IEEE, 2005) Yarman, Bekir Sıddık Binboğa; Şengül, Metin; Kılınç, Ali; Aksen, AhmetIn this paper, a reflectance-based "non linear interpolation method" is presented to model the measured or computed data, obtained from a "passive one-port physical device" using mixed lumped and distributed elements. Mixed element model is constructed with cascade connection of series inductors [L], commensurate transmission lines or so called Unit Elements [UE] and shunt capacitors[C]. Basis of the new model rests on the numerical generation of the scattering parameters of the lossless two-port constructed with cascade connection of simple [L]-[UE]-[C] elements which describes a lossless 2-port in Darlington sense. The new modeling technique does not require direct optimization of the circuit elements of the selected topology. Rather, two-variable reflection coefficient is directly determined by means of a non linear but "convergence guaranteed" interpolation process to best fit the given data. A low-pass filter input reflection coefficient modeling example is included to exhibit the utilization of the proposed modeling method.Yayın Blind channel estimation for space-time coding systems with Baum-Welch algorithm(IEEE, 2002) Çırpan, Hakan Ali; Panayırcı, ErdalIn recent years, space-time coding is proposed to provide significant capacity gains over the traditional communication systems in fading wireless channels. In this paper, we consider the problem of blind estimation of the channel parameters along with space-time coded signals. Our proposed approach exploits the finite alphabet property of the space-time coded signals and is based on the unconditional signal model by treating the information sequence as stochastic I.I.D. sequences. The iterative Baum-Welch algorithm is then adapted to solve resulting unconditional ML optimization cost function. Finally, some simulation results are presented.Yayın A parametric approach to describe distributed two-ports with lumped discontinuities for the design of broadband MMIC's(IEEE, 2003) Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaThis paper addreses the use of mixed lumped and distributed elements in the matching equalizers of broadband microwave communication subsytems in MMIC realizations. Construction of two-variable scattering functions for lossless equalizers with mixed lumped-distributed elements is discussed. For the computer aided design and the simulation of lossless distributed two-ports with lumped discontinuity models, a parametric real frequency matching technique is presented. It is expected that the proposed tool will find practical applications for accurate representation of MMIC layouts. A matching network design example is included to systematically exhibit the implementation of the proposed approach.Yayın Reflectance data model with mixed lumped and distributed elements for wireless communication systems(IEEE, 2005) Yarman, Bekir Sıddık Binboğa; Şengül, Metin; Kılınç, Ali; Aksen, AhmetIn this paper, a new method is presented to model the given reflectance data obtained from a "passive one-port physical device", as a lossless two port consists of lumped and distributed elements. Basis of the new method rests on the interpolation of the given data as a realizable bounded-real (BR) reflection function in two variables. The desired circuit model is then obtained as the result of the synthesis of this function in two kinds of elements; namely, distributed and lumped circuit elements. An algorithm is presented to generate the circuit model step by step and an example is also included to exhibit the utilization of the new modeling algorithm.
