19 sonuçlar
Arama Sonuçları
Listeleniyor 1 - 10 / 19
Yayın 2W wideband microwave PA design for 824-2170 MHz band using normalized gain function method(IEEE, 2013) Köprü, Ramazan; Kuntman, Hulusi Hakan; Yarman, Bekir Sıddık BinboğaIn this work, we present the design of a 2W linear wideband microwave PA (power amplifier) targeted to operate in 824-2170 MHz mobile frequency range covering GSM850, EGSM, DCS, PCS and WCDMA. The design is basically based on the NGF (Normalized Gain Function) method which is very recently introduced into the literature. NGF is defined as the ratio of T and |S-21|(2), i.e. T-NGF= T/|S-21|(2), shape of the gain function of the amplifier to be designed and the shape of the transistor forward gain function, respectively. Synthesis of input/output matching networks (IMN/OMN) of the amplifier requires target gain functions, which are mathematically generated in terms of TNGF. The particular transistor used in the design is FP31QF, a 2W HFET from TriQuint Semiconductor. Theoretical PA performance obtained in Matlab is shown to be in a very high agreement with the simulated performance in MWO (Microwave Office) of AWR Inc.Yayın A tunable inductance topology to realize frequency tunable matching networks and amplifiers(IEEE, 2013) Atilla, Doğu Çağdaş; Aydın, Çağatay; Köprü, Ramazan; Nesimoğlu, Tayfun; Yarman, Bekir Sıddık BinboğaCoverage of commercial communication standards such as GSM, UMTS, Wi-Fi and Wi-Max within a single transceiver chip is one of the most desired properties by wireless communication manufacturers. In this regard, communication companies are keenly interested in the design of high power amplifiers for broadband cellular communications to achieve this coverage. In this work, design of broadband tunable matching networks is investigated using Real Frequency Techniques. In practical applications, tunability is needed to compensate for the load impedance variations with environmental effects. In order to be able to work on sample structures, impedance transforming filters with proper topology are chosen and a broadband tunable matching network with a tunability strategy is developed. Eventually a broadband amplifier has been designed using the tunable inductor concept.Yayın A broadband microwave amplifier design by means of immittance based data modelling tool(IEEE, 2002) Kılınç, Ali; Pınarbaşı, Hacı; Şengül, Metin; Yarman, Bekir Sıddık BinboğaIn this paper a practical broadband microwave amplifier design algorithm is introduced utilizing the immittance data-modelling tool. In the course of design, first, the optimum input and output terminations for the active device are produced employing the real frequency technique. Then, these terminations are modelled utilizing the new immittance-modelling tool to synthesize the front-end and back-end matching networks. An example is included to exhibit the implementation of the proposed design algorithm to construct a single stage BJT amplifier over a wide frequency band. It is expected that the proposed design algorithm will find applications to realize wideband microwave amplifiers put on MMIC for mobile communication.Yayın A novel method to design wideband power amplifier for wireless communication(IEEE, 2013) Köprü, Ramazan; Kuntman, Hulusi Hakan; Yarman, Bekir Sıddık BinboğaA new approach is presented to design microwave amplifiers to deliver maximum output power using Simplified Real Frequency Technique (SRFT). Proposed method tracks the maximum stable gain (MSG) curve of the active device (BJT, FET etc.) under consideration. Maximum Stable Gain Amplifier (MSGA) possesses higher gain than that of the constant or Flat Gain Amplifier (FGA) along the operating frequency band. Compared to FGA, it is this feature that makes MSGA high efficiency and low DC power consumption amplifier. Employing the proposed design method, a MSG power amplifier is constructed over the frequency band of 800-5200 MHz which can be utilized for GSM, UMTS, Wi-Fi and Wi-MAX applications.Yayın Wideband bandpass filter design for X band horn antenna via numerical techniques(IEEE Computer Society, 2015) Köprü, Ramazan; Aydın, Çağatay; Atilla, Doğu Çağdaş; Kılınç, Sedat; Yarman, Bekir Sıddık BinboğaDesign of an X band horn antenna and a wideband unit element microstrip bandpass filter (UEBPF) for this antenna are presented with satisfactory agreement between theoretical and simulation results. Numerical methods known as real frequency techniques (RFTs) have been utilized in Richards domain to yield optimum driving point Darlington input impedance function belonging to the UEBPF that enables a maximum RF power transmission between the designed horn antenna and an RF driving source. Using a high precision Richards immittance synthesis package in Matlab, characteristic impedance values of each UE, out of k number of commensurate (equal length) transmission lines forming the UEBPF, is extracted from the input impedance function. Theoretical design (Matlab of Mathworks Inc.) and simulation (ADS of Agilent Inc., HFSS of ANSYS Corp.) results are shown to be very promising and in a high degree of agreement with each other.Yayın Transformerless bandpass matching network design for Y-Shaped monopole antenna(IEEE, 2015) Aydın, Çağatay; Atilla, Doğu Çağdaş; Karakuş, Cahit; Köprü, Ramazan; Yarman, Bekir Sıddık BinboğaIn this paper, a transformerless bandpass matching network design procedure is presented. The Real Frequency Techniques are powerful numerical methods to design wideband lossless 2-port networks such that filters and matching networks. In these techniques, the value of the termination resistance of the designed network could not be yielded as 50 ohm by numerical package. Hence, a transformer is also required for 50 ohm termination which is not practical for high frequency applications. Also in this study a novel wideband monopole antenna is presented. The proposed antenna is consisting of two major elements; Y-shaped impedance matching plate and hemi-circular radiator. Moreover Y-shaped impedance matching plate connected to a feeding probe excites the suspended hemi-circular radiator via air gap. and its frequency band is expanded by using transformerless bandpass design procedure.Yayın Dual band matching network design via real frequency technique by mapping from a band pass prototype(IEEE, 2016) Yıldız, Serkan; Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaIn this study, a new method of design for dual band matching network is presented. A transformer-less Band Pass (BP) prototype matching network is synthesized with well-known Simplified Real Frequency Technique (SRFT) via cascaded combination of Low Pass (LP) and High Pass (HP) sections and optimized under LP to BP frequency transformation to create dual band response. Scattering parameters based descriptive functions of transformer-less BP prototype network is obtained. Dual band response is derived via frequency mapping on the produced BP prototype network. The new method combines several advantages both in design and realization step. The application of this method is discussed with sequential transformation based approach. A dual band matching network design for a PIFA antenna is presented. By using this method dual band characteristic is derived with only one step application of frequency mapping which let use to have more practical realizations.Yayın Multiband matching network design via transformation based real frequency approach(IEEE, 2016) Yıldız, Serkan; Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaIn this paper, a new method is presented for multiband matching network design. Low pass to band pass (LP-BP) frequency transformation is incorporated with the parametric Real Frequency Technique (RFT) for creating multiband network functions. In the new parametric approach, the poles of a low pass type impedance function are optimized under LP-BP transformation, for multiband matching of complex terminations. The resultant matching network is realized with resonance sections yielding multiband transducer power gain (TPG) characteristic.Yayın Dual band filter design for GSM bands using frequency mapping and real frequency technique(IEEE, 2018) Yıldız, Serkan; Kılınç, Sedat; Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaIn this study, dual band frequency mapping is incorporated with Real Frequency Technique to design a dual band filter for GSM900 and GSM1800/UMTS bands. The proposed real frequency design technique (RFT) involves a parametric representation of input impedance of filter and the use of a dual band (DB) frequency mapping. A direct DB frequency mapping from low pass proto-type network is utilized along with the design and optimization of a low pass prototype network. Microstrip implementation of the designed filter and measurement results of the design are presented.Yayın Multiband and concurrent matching network design via brune sections(IEEE, 2017) Yıldız, Serkan; Aksen, Ahmet; Yarman, Bekir Sıddık BinboğaA general multiband matching network design methodology for complex load impedance terminations is presented. In the proposed approach, Real Frequency Techniques (RFT) are used to define and optimize the multiband matching network. In the characterization of the multiband network, multiple notch bands are obtained by the employment of finite transmission zeros (FTZ) in the transfer function. Brune section realization of finite transmission zeros and the associated coupled coil free realizations are discussed. A triple band matching network design for a triple band Sierpinski antenna load is presented to illustrate the performance of the proposed approach.
